Wanted - set of uprights from Cerbera/Tuscan/Tamora/T350/Sag

[teamHOLDENracing]

Hi all

Slightly long shot and I can always go to the breakers who will supply a full set for £400...

I am after a set of uprights from any post Chim/Griff TVR (they are all the same). By uprights I mean the parts that bolt to the wishbones front and rear including the hubs/bearing carriers, but excluding brake callipers.

I am considering changing the uprights on my race car as they use Granada bearings which are a little small for race purposes, particularly now we are running with effective aero. The more modern road cars use bigger Jeep bearings.

Ideally I would be looking to borrow a front and a rear upright to assess whether the re-engineering of race wishbones to get them to fit is worth the hassle. Assuming the answer is yes then I would be looking to buy a full set.

I suspect this is a part that none of you ever change, but thought it would be worth a try...

Many thanks

Andy

[TVRleigh_BBWR]

I think I have one of what you want.
Well I have a Hub and joint that goes on the top. I think it from a tuscan, I bought for for the caliper.

I can take a picture tonight if you want.

It is bloody heavy (esp seeing as most of it is ali.) so post would be expensive.

[teamHOLDENracing]

Leigh - that would be great if you could take a photo just to check we are talking about the same thing.

Cheers

Andy

[TVRleigh_BBWR]

Hi Andy,

Hope these help