EFI WARNING
Author
Discussion

T5AMX

Original Poster:

296 posts

282 months

Thursday 16th August 2007
quotequote all
Can anyone help.. My 2000 tuscan says "warning efi failure" on the dash.
It all runs well but if i turn right or go round a roundabout it runs on 4/5 cylinders, however if i turn left it goes away and my LCD is back to normal then it comes back on again.. appears i have a loose connection or something.. where should I start to look
Can anyone help me please.

VARLEYHYD

2,244 posts

237 months

Friday 17th August 2007
quotequote all
T5AMX said:
Can anyone help.. My 2000 tuscan says "warning efi failure" on the dash.
It all runs well but if i turn right or go round a roundabout it runs on 4/5 cylinders, however if i turn left it goes away and my LCD is back to normal then it comes back on again.. appears i have a loose connection or something.. where should I start to look
Can anyone help me please.
Long shot; but try the sensor connector on top of the airbox labelled 'air temp' if not try the wiring connection plugs under the back of the airbox at the bulkhead. (could be the engine mounts gone pressing back on the wiring connections)

Hope this helps

G

T5AMX

Original Poster:

296 posts

282 months

Friday 17th August 2007
quotequote all
sorry to sound dumb.. but your advise..... i take it you mean bonnet off

VARLEYHYD

2,244 posts

237 months

Friday 17th August 2007
quotequote all
HERE WE GO!

The airbox is the black shiny bit, the air temp sensor plugs is in the middle of it(its got a yellow sleeve on mine)


Hope this helps -or Dealer

T5AMX

Original Poster:

296 posts

282 months

Friday 17th August 2007
quotequote all
Brilliant thanks

kevin63

4,661 posts

283 months

Friday 17th August 2007
quotequote all
[quote=VARLEYHYD]HERE WE GO!

The airbox is the black shiny bit, the air temp sensor plugs is in the middle of it(its got a yellow sleeve on mine)




VARLEYHYDsays "Black shinny bit", I would like to challenge anyone to find a none shinny bit on that car, best one I have ever seen.