Mothers wax and reflections top-coat
Discussion
Hi all,
After the house move has settled down somewhat, I finally got round to emptying the garage and seeing if the P&J would fit in ok. Pic below shows it did so I am chuffed with that (and, yes, I soon took the bikes off the wall to ease my paranoic fear of them falling off during the night......)
I am still using the Mothers stuff from that nice chap Nick at MaxxWaxx and finally got round to using the carnauba wax paste - smells luverly and goes on/comes off really easy with little to no elbow grease required. The finish is really, really good too but I don't think the pic below does it enough justice.
All I am waiting on now is some of the reflections top coat stuff which is supposed to give a really nice, deep lustre/shine - has anyone used this on a dark colour (pearl) that can give me their opinion?
I don't think I will be going back to Meg's, that's for sure...
Andy
After the house move has settled down somewhat, I finally got round to emptying the garage and seeing if the P&J would fit in ok. Pic below shows it did so I am chuffed with that (and, yes, I soon took the bikes off the wall to ease my paranoic fear of them falling off during the night......)
I am still using the Mothers stuff from that nice chap Nick at MaxxWaxx and finally got round to using the carnauba wax paste - smells luverly and goes on/comes off really easy with little to no elbow grease required. The finish is really, really good too but I don't think the pic below does it enough justice.
All I am waiting on now is some of the reflections top coat stuff which is supposed to give a really nice, deep lustre/shine - has anyone used this on a dark colour (pearl) that can give me their opinion?
I don't think I will be going back to Meg's, that's for sure...
Andy
andyoleary said:
Pic justice, you must be joking, it looks fantastic
Just seen where from, just never heard of it before
Edited by s6boy on Thursday 22 March 17:05
Thanks John! I switched over from Meguiars products a short while back after reading about the Mothers stuff on here. I bought my gear from www.maxxwaxx.com and use their clay bar treatment (once or twice a year is recommended I think), 3-stage treatment (pre-wax cleaner, sealer & glaze, carnauba wax paste) and am waiting on the reflections top-coat for an even "wetter" finish.
Cheers
Andy
Cheers
Andy
s6boy said:
Pic justice, you must be joking, it looks fantastic
Exactly what are you using to get that finish, and where from please.
Just seen where from, just never heard of it before
Just seen where from, just never heard of it before
www.maxx-waxx.com
ETA Beaten to it.
Edited by madbadger on Thursday 22 March 17:25
andyoleary said:
Quite right Alan, I will get round to that this weekend along with some way to tell me when to stop moving forward - hanging thing from ceiling or timber-stop on the floor maybe, will see what works best.
Cheers
Andy
Cheers
Andy
I bought a block of foam 5 ft tall and stuck it to the back wall ..
stops those little mishaps.. can costs < £10..
andyoleary said:
Thanks John! I switched over from Meguiars products a short while back after reading about the Mothers stuff on here. I bought my gear from www.maxxwaxx.com and use their clay bar treatment (once or twice a year is recommended I think), 3-stage treatment (pre-wax cleaner, sealer & glaze, carnauba wax paste) and am waiting on the reflections top-coat for an even "wetter" finish.
Have used Mothers for the past year and it works a treat. The 3 stage process took me 5hrs last summer, and is due again now, but the results lasted for ages. Highly recommended.
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff




