Ean Walley Turbo installation

[LongBaz]

Hi all. I'm having problems with the TVR as no spark or fuel. Discovered this wire was broken off in the plug. Would you be able to have a look at yours and tell me which pin it should be attached to. It is the lightest blue wire. The Turbo installation was done by Ean Walley. I understand that Ean sent these kits out for self installation, if so did he provide a wiring diagram.
Looks like megasquirt has been installed using part of the old 14CUX as an adapter.
cheers

[GreenV8S]

Soldered wires without any support or strain relief - you're lucky if only one is broken.

Your best bet would be to examine the unconnected terminals carefully and see if you can locate the one with the broken end of the wire soldered to it.