Rear calipers

[S6 Devil]

Does anyone know the part number for the rear calipers on a Tuscan?

[NCE 61]

J0134 (left) J0135 (right).

[S6 Devil]

NCE 61 said:

J0134 (left) J0135 (right).

Thanks, I should have specified that I am looking for the Unipart numbers. I want to see if my local motor factors have them as I believe they are Ford sierra, Cosworth calipers.

[S6PNJ]

From recollection, they are the same caliper that was fitted to the 1.6 Sierra upwards across the whole range including the Cossie and also included some Granadas. Surely any motor factor can get the number from there.

In fact from a quick Google, going from the first link when searching for 'Rear Brake Caliper Ford Sierra' gets you part numbers BCA1346 and BCA 1347, just over £50 each. Don't think they are Unipart numbers though!

Edited by S6PNJ on Sunday 11th March 14:06

[Ant.]

Pretty sure they are the same caliper across sierra/granda/scorpio fitted.with 273mm VENTED rear discs.

[S6PNJ]

Although just found this eBay auction for a Unipart item with ref's GBC2050/LC3165

[330p4]

They are cosworth sierra 4 x 4 or Granada Scorpio the std sierra is NOT VENTED disc so slot is not wide enough. Power torque at Coventry had a load might be worth a call approx £110 if they have any left
Ian

[phillpot]

"Standard" Sierra (1.6, 1.8 etc) were drum brakes.Used on most S Series

High performance models like XR4i and 2wd Cozzy were solid (thin) discs. S4, V8s early Chim and Griff ?

Cosworth 4x4 had the vented rear discs.Later chim Griff etc.....

http://www.brakesint.co.uk/, Very useful website for checking out dimensions etc.

[S6 Devil]

Thanks all. I have emailed Torque power. I also found this site which supply the sierra cosworth 4 x 4 calipers, Part numbers BCA2060 AND BCA2061. I think these are the ones!

http://www.brakepartssuperstore.org.uk/contents/en...

[VARLEYHYD]

S6 Devil said:

Thanks all. I have emailed Torque power. I also found this site which supply the sierra cosworth 4 x 4 calipers, Part numbers BCA2060 AND BCA2061. I think these are the ones!

http://www.brakepartssuperstore.org.uk/contents/en...

Ford numbers in the bible

G

[S6 Devil]

VARLEYHYD said:

Ford numbers in the bible

G

Ahh, Thanks G, will have a look!

[Robertjp]

These any good to you? just saw the ad....

http://www.pistonheads.com/sales/3727833.htm

p.s. pads for £17?! i have just paid £95 odd for the Ferrodo DS2500 set

makes you wonder about the discs too at £35...but i think they are 10mm short on diameter.

Edited by Robertjp on Monday 12th March 08:01

[S6 Devil]

Robertjp said:

These any good to you? just saw the ad....

http://www.pistonheads.com/sales/3727833.htm

p.s. pads for £17?! i have just paid £95 odd for the Ferrodo DS2500 set

makes you wonder about the discs too at £35...but i think they are 10mm short on diameter.

Edited by Robertjp on Monday 12th March 08:01

I saw those but think I need them for 273mm discs.

[m4tti]

Didnt you get your front calipers refurbed by GodSpeed.. seem to remember a topic started by you..

You not want to use them again?

[S6 Devil]

m4tti said:

Didnt you get your front calipers refurbed by GodSpeed.. seem to remember a topic started by you..

You not want to use them again?

Yes, I did but don't really want the car off the road for a month whilst I wait for them to be done. For £200 odd I would rather just buy new ones. The front AP's are somewhat more pricey new!

[AM78]

S6 Devil said:

Robertjp said:

These any good to you? just saw the ad....

http://www.pistonheads.com/sales/3727833.htm

p.s. pads for £17?! i have just paid £95 odd for the Ferrodo DS2500 set

makes you wonder about the discs too at £35...but i think they are 10mm short on diameter.

Edited by Robertjp on Monday 12th March 08:01

I saw those but think I need them for 273mm discs.

Wouldn't the disc on http://www.brakepartssuperstore.org.uk/contents/en... page fit ??

Spec

BDS5168 £45.19



6702
Weight: 10.00 kg


2 x Brake Discs
Qty 2
Disc Type Vented
Mountings 4
Disc Diameter 273.0
Disc Thickness 20.0
Overall Height 43.5
Hub Hole (Diameter) 63.8

[nawarne]

Gents,
Once you've resolved the question, would someone update the TUSCAN parts wiki at the top of the Tuscan page?

TIA Nick

[m4tti]

AM78 said:

Wouldn't the disc on http://www.brakepartssuperstore.org.uk/contents/en... page fit ??

Spec

BDS5168 45.19



6702
Weight: 10.00 kg


2 x Brake Discs
Qty 2
Disc Type Vented
Mountings 4
Disc Diameter 273.0
Disc Thickness 20.0
Overall Height 43.5
Hub Hole (Diameter) 63.8

Those are 4 stud discs.. so no

[Bikali]

Hi I just bought a caliper to replace the rear nearside on my Tamora. The granada 1986 to 1994 rear ventilated caliper (20mm thick disc) fits. However as the Tamora has the caliper behind the rear axle and the granada in front. The hand required is the opposite.

[WazzaL]

Trying to work out calipers for my Tuscan 2.

Are we sure BCA1346 is correct as it appears those suit 11mm discs:
https://brakeparts.co.uk/shop/Ford/Sierra/88-93/Si...

However BCA2060 suit 20mm discs.
https://brakeparts.co.uk/shop/Ford/Sierra/90-93/Si...


Just want to make sure I order the right set!