Locking wheel nuts

[FlipFlopGriff]

I have some OZ multispoke split rims and will be fitting them soon. However the locking nuts for the front are shorter than the rears. There are no locking nuts and I want to buy some. Does anyone know the spec I need to look for ie Thread and key hex size.
I have looked at the McGard web site but not sure waht I need.
www.mcgard.com/deutschland/englisch/e_frameset1.html
Many thanks for all help.
FFG

[tvr4ever]

The thread is standard Ford 12 x 1.5 mm.


Fred


PS For a Griffith that is, I have no idea of the rest.

>> Edited by tvr4ever on Thursday 24th June 16:36

[FlipFlopGriff]

Fred,
They are for a Griff.
Thanks for the thread sizes.
Is there anything special I should ask for when I order them as I'll likely get them via the web or phone order.
Anyone with these wheels got any recommendations.
FFG

[cuzza]

You'll be able to get locking nuts for Ford hubs at Halfwits - saves messing around with postage etc.

[Trefor]

Does anyone have the info I need to get locking nuts for a Tuscan/T350 hub/studs? Thread size etc?

Thanks.

[tvr4ever]

When you buy your locknuts make sure you get the same lenght or slightly longer nuts.
Any Ford dealer should have them on stock.

Fred

[kevin63]

The threads on the nuts are 1/2 inch UNF. I made my own so cannot help with where to get them from.

[FlipFlopGriff]

This is now wheel nuts too.
Fitted the rears of the OZ multispokes and I can only get the stubby (25mm long) nuts behind the centre cap. Only had 8 of these so the car looks funny with OZ's at the rear and standard 500's on the front.
Are these freely available and can you conform the thread - I have one 25mm x 1.5 and one 1/2" UNF. Someone must be wrong.
Will try some local motor factors and can't now get into McGards web site.
Thanks
FFG