dodgy indicators

[provost]

help required please!!nearside indicators front middle and rear stopped working on my s2, right side fine
any ideas please?could it be stalk of fuse of neither.

[Deadfast]

Do your hazards still work both sides?

My nearside front indicator stopped working. Following advice on here I took the rear connector apart, cleaned it up, straightened some pins on the bulbholder and away we went. Strange but true!

Try posting specifically on the "S" forum. Very helpful source of advice.

[nawarne]

IIRC, the S models were fused each side. Worth a check - haven't had my S for 5/6 years.

If it's not the fuse(and I'd check to see why it was blown), then I'd look at the indicator stalk....on an S they are getting to that age.

Nick

[provost]

nawarne said:

IIRC, the S models were fused each side. Worth a check - haven't had my S for 5/6 years.

If it's not the fuse(and I'd check to see why it was blown), then I'd look at the indicator stalk....on an S they are getting to that age.

Nick

many thanks will give fuses a try,but they are so bloody difficult to get at!!regards dave.