This place is like heaven on earth
Discussion
Have no connection with this company, have found plugs and sockets when visiting it in the past, have now delved deeper into it
Lots to be found here https://www.automotiveconnectors.com/all-products....
Many parts aren't easily found
Search - Lucas Rists - Heaven on earth is the result of the search
https://www.automotiveconnectors.com/9-way-lucas-r...
https://www.automotiveconnectors.com/9-way-lucas-r...
Lots to be found here https://www.automotiveconnectors.com/all-products....
Many parts aren't easily found
Search - Lucas Rists - Heaven on earth is the result of the search
https://www.automotiveconnectors.com/9-way-lucas-r...
https://www.automotiveconnectors.com/9-way-lucas-r...
Edited by Penelope Stopit on Wednesday 7th April 23:06
Boosted LS1 said:
I did and all went very dark :-)
FunnyBoosted LS1 said:
Appreciated, many specials in thereWill attempt to keep adding
Ford/Motorcraft
http://www.spautoparts.com/documents/Pigtails/OneC...
http://www.spautoparts.com/documents/Pigtails/TwoC...
http://www.spautoparts.com/documents/Pigtails/Thre...
http://www.spautoparts.com/documents/Pigtails/Four...
http://www.spautoparts.com/documents/Pigtails/5Cav...
http://www.spautoparts.com/documents/Pigtails/6Cav...
http://www.spautoparts.com/documents/Pigtails/7Cav...
http://www.spautoparts.com/documents/Pigtails/8Cav...
http://www.spautoparts.com/documents/Pigtails/910C...
http://www.spautoparts.com/documents/Pigtails/1112...
http://www.spautoparts.com/documents/E12MoreThanTw...
https://www.motorcraft.com/content/dam/ford-motorc...
http://www.spautoparts.com/documents/Pigtails/OneC...
http://www.spautoparts.com/documents/Pigtails/TwoC...
http://www.spautoparts.com/documents/Pigtails/Thre...
http://www.spautoparts.com/documents/Pigtails/Four...
http://www.spautoparts.com/documents/Pigtails/5Cav...
http://www.spautoparts.com/documents/Pigtails/6Cav...
http://www.spautoparts.com/documents/Pigtails/7Cav...
http://www.spautoparts.com/documents/Pigtails/8Cav...
http://www.spautoparts.com/documents/Pigtails/910C...
http://www.spautoparts.com/documents/Pigtails/1112...
http://www.spautoparts.com/documents/E12MoreThanTw...
https://www.motorcraft.com/content/dam/ford-motorc...
jazzybees said:
Hi.
Thank you for listing/linking the manuals.
I have looked through your first link.
And they have the ring terminal that I want.
But I don’t know what size to get.
I’m not familiar with awg sizes.
Which one should I get, to fit onto a tvr chimaera positive cable to the starter motor.
Thank you .
Kind regards.
Going by past information postedThank you for listing/linking the manuals.
I have looked through your first link.
And they have the ring terminal that I want.
But I don’t know what size to get.
I’m not familiar with awg sizes.
Which one should I get, to fit onto a tvr chimaera positive cable to the starter motor.
Thank you .
Kind regards.
Standard cable is 35mm²
Uprated cable is often found to be 50mm²
Starter solenoid terminal size being M8
astonman said:
Thank you Penny, would this gel be a good thing to fill my fan connectors with?
At present,people have suggested vaseline to prevent corrosion.But on the T350 the connectors sit adjacent to the flat radiator and the heat causes the vaseline to melt and disappear!
Yes the gel should be ideal for the job as long as there's enough length of cable that will allow you to immerse the whole plug and cables into a container of gel, perhaps it would be good to make an oblong box section out of plastic or buy a small hobby box, fill with gel and immerse. Wouldn't do any harm in leaving the box section or box in placeAt present,people have suggested vaseline to prevent corrosion.But on the T350 the connectors sit adjacent to the flat radiator and the heat causes the vaseline to melt and disappear!
Would a sealed plug be better? https://www.automotiveconnectors.com/connector-kit...
You would need to shop around for heavy enough plugs and terminals that will handle the fan motor current draw
https://porschedocs.s3.eu-west-2.amazonaws.com/pdf...
Edited by Penelope Stopit on Wednesday 23 June 08:36
caduceus said:
Definitely going to get some magic gel. my outside lights have shorted again
Also thinking about relocating my battery to the boot, so will need cable and ends.
Good find Pen.
There was a video on youtube showing someone using a ball from a ball bearing and a vice to crimp battery cable eyelet terminalsAlso thinking about relocating my battery to the boot, so will need cable and ends.
Good find Pen.
Will post it here if I find it
Anyway, a ball from a ball bearing could be taped onto the terminal, cable inserted into the terminal, placed in vice and ball squeezed into the terminal for crimping
PH member SturdyHSV https://www.pistonheads.com/gassing/topic.asp?h=0&... found out about the magic gel
Like yourself. I must order some for next time an underground mains cable joint trips its breaker
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff