help ford ranger remote programing

[cerby 4.2]

does anyone know how to programe a remote fob for a 54 plate ranger thanks

[nighthawk]

Yes I do










Remove keys from ignition and close all the doors
open drivers door
insert key into ignition and turn from OFF to ON three times ending in the OFF position, then press the drivers door light switch 3 times

the key and switch cycling must be done within 24 seconds

If you've got the locking system into learn mode, the door actuators will lock and unlock

when they've finished doing their stuff, press any button on the remote TWICE

The vehicle should confirm by doing the locking thing again

If it doesn't leave the vehicle alone for a minute or so to reset itself and then start again


If you have 2 remotes or more, you need to press a button on each of those remotes twice as well otherwise they'll be forgotten

hope that helps

[cerby 4.2]

thanks for your help your advice worked first time once again thanks for your help cery 4.2

[nighthawk]

No problems