Newest member of the Ford drivers family

Newest member of the Ford drivers family

Author
Discussion

up-the-dubs

Original Poster:

4,282 posts

236 months

Tuesday 16th May 2006
quotequote all
Howdy folks, never been down here in the Ford forum before, but thought I'd say hello . Just bought a 2000 Mondeo Ghia X 2.0L. Full to the gills with kit and running ok (full spec is on my profile).




The phone speaker has already been moved to the passanger footwell. Spot the MOST ridiculus place to put it !

Quick question if I may, my remote key does not work especially well even after a new battery. Is there somewhere in particular I should be aiming it at? Manual doesn't stipulate anywhere in particular.

cj_eds

1,567 posts

228 months

Tuesday 16th May 2006
quotequote all
depends if its an infra-red one or not - if its got the wee glass window on the key then I think the receiver is by the door handle?
If its a radio one then point it whereever you like, but touching your head seems to work best

Have a look at www.mirez.co.uk for plenty of useful info

DennisTheMenace

15,605 posts

275 months

Friday 19th May 2006
quotequote all
It may need WDS , The puma has decided not to comunicate with its key for some reason , the mondeo is a good car , you can throw them about a miff a few sport car drivers in them on the twistys

supersport

4,254 posts

234 months

Thursday 25th May 2006
quotequote all
If the batteries have gone flat and you take them out for more than 25 seconds, the car will nolonger respond to the remote fob. You can either take it to a main dealer who will reaquant the two, or there is a procedure in the owners manual!

DennisTheMenace

15,605 posts

275 months

Monday 29th May 2006
quotequote all
Just did the recoding on the mirez site and the pumas remote locking is working again , so try that 1st before the dealer.

up-the-dubs

Original Poster:

4,282 posts

236 months

Monday 29th May 2006
quotequote all
DennisTheMenace said:
Just did the recoding on the mirez site and the pumas remote locking is working again , so try that 1st before the dealer.


Cheers, did the puma work at all before hand? Mine is interrmittant, having to push the button several times (sometimes on the first go, generally not) irrispective of where I stand with the key. Thanks.

DennisTheMenace

15,605 posts

275 months

Monday 29th May 2006
quotequote all
No ,nothing at allThe remote light worked but it just lost all configuration with the car , if yiu havent changed the battery try that and refreshing it by doing the set up might help , bear in mind it infra red remote and needs to be pointed at the receiver , in the puma its by the interior light , edited to add : yours has radio remote so it should work within a certain range .

>> Edited by DennisTheMenace on Monday 29th May 20:41

up-the-dubs

Original Poster:

4,282 posts

236 months

Monday 29th May 2006
quotequote all
DennisTheMenace said:
No ,nothing at allThe remote light worked but it just lost all configuration with the car , if yiu havent changed the battery try that and refreshing it by doing the set up might help , bear in mind it infra red remote and needs to be pointed at the receiver , in the puma its by the interior light , edited to add : yours has radio remote so it should work within a certain range .

>> Edited by DennisTheMenace on Monday 29th May 20:41



Yea, radio remote here. I'm thinking it's the key as there is a new battery in it but it didn't help at all. On the odd occasion it'll open straight away, but generally I have to stand there plipping away before something happens. I'll ring Ford I think, to see if the re-programming will help.

Thanks mate .

DennisTheMenace

15,605 posts

275 months

Monday 29th May 2006
quotequote all
Get another key , it might be the micro switch might be failing , get another key off ebay , and get it programmed up .

up-the-dubs

Original Poster:

4,282 posts

236 months

Monday 29th May 2006
quotequote all
Ok..... the cogs aren't working particularly well in my corner at the moment. How do I get a key on e-bay? Buy any old key and have it as a plipper keyring or buy an uncut blank and have it cut somehow?

Intruiging and confusing all at once .

up-the-dubs

Original Poster:

4,282 posts

236 months

Monday 29th May 2006
quotequote all
Wow cheers Dennis, ok then.... been looking on ebay, and there's lots of them! Last question.... Can local shops cut a key if I just buy a blank? It's just that I'm not to keen on having an ebay seller know my address and have a copy of the key to my car.

cj_eds

1,567 posts

228 months

Tuesday 30th May 2006
quotequote all
up-the-dubs said:
Wow cheers Dennis, ok then.... been looking on ebay, and there's lots of them! Last question.... Can local shops cut a key if I just buy a blank? It's just that I'm not to keen on having an ebay seller know my address and have a copy of the key to my car.

You should be able to buy any old key fob (or a new Ford one for about £40!) and program it to your car. The actual metal part of the key detaches and clips onto the front of the fob so if its just a replacement you don't need to get a new one cut.
The problem you've got sounded the same as mine was, and was fixed with a new fob.

An added problem is that on some cars there is meant to be an additional switch in the software to prevent you from programming in new keys (to stop people getting spares cut for fleet cars etc). If that is on, then the wee glass tube in the key (the PATS bit) won't be recognised by the car. If thats the case, you need to pop open the old one, carefully cut out the glass tube (don't damage it!!!) and put it into the replacement keyfob.