Wiring up a willys Jeep trailer

[Imaplumber]

I have just bought a 1945-1950 Willy's Jeep trailer, but now I need the wiring putting in

Plus the wiring from the Jeep to the rear socket, just so it complies with any MOT rules

Does anyone know of a vehicle Auto/Electrician that can do this job ?
Someone close to where I live I possible

Postcode UB54JB

I have had a look on various Willy's Jeep forums, but they are all miles away

Edited by Imaplumber on Tuesday 7th July 09:16

[Miserablegit]

Not quite sure what the question is - apologies

I’m assuming you have a tow bar and electrical fitting on the jeep already.

What does the connector look like?is it a standard connector or jeep specific?

Take a look at this site as it gives the standard trailer wiring setup for lights on other vehicles. It should be easy enough to work out- you just take the cables to the plug and wire accordingly. Easy enough to diy - just make sure the cable joins are good.
https://www.tridentuk.com/gb/kbase/trailer-wiring....

[Imaplumber]

There is no wiring to the socket on the Jeep, there isn't any wiring to the lights on the trailer

So its a complete wiring job

Yes I have a tow hook (military type)

There is a socket on the Jeep, but no wires/cables

Edited by Imaplumber on Tuesday 7th July 10:36

[CS Garth]

[Imaplumber]

Here is a picture of the socket on my Jeep, with the cover down and inside the cover
[url]

|https://thumbsnap.com/sZjSUmzC[/url]

[fatboy18]

Get it right
https://www.facebook.com/jeepwillysclub/

http://www.classicjeeps.co.uk/

https://community.jeepowners.club/

http://www.willysjeepuk.co.uk/index.php/11

Better off giving the specialists a call

[Imaplumber]

Thanks I found one, just never updated this thread

[fatboy18]