Local glass splashback suppliers?
Discussion
Morning all, we're getting close to finishing the kitchen but need some splashbacks.
Have been to Allder Glass in Wokingham and they have a decent selection but I'd like to get a couple more quotes.
A few places just seem to do supply only if we template - I'd rather hand the whole job over.
I've seen a couple of posts about acrylic/perspex instead of glass - no idea if that's cheaper/better/worse?
We're near Reading.
Thanks,
Steve
Have been to Allder Glass in Wokingham and they have a decent selection but I'd like to get a couple more quotes.
A few places just seem to do supply only if we template - I'd rather hand the whole job over.
I've seen a couple of posts about acrylic/perspex instead of glass - no idea if that's cheaper/better/worse?
We're near Reading.
Thanks,
Steve
Cameo Glass in Swindon did mine very nicely. Our kitchen supplier was in Oxford and he uses them (though I went direct) so I suspect they'd travel to Reading no trouble. They came to take templates and came back to fit. Never template yourself as any error is your fault - if they template and it doesn't fit it's their fault.
Perspex is not the same at all. My brother had it and it looks cheap and nasty - scratches easily and warps where it was too near the hob.
http://cameoglassuk.co.uk
Perspex is not the same at all. My brother had it and it looks cheap and nasty - scratches easily and warps where it was too near the hob.
http://cameoglassuk.co.uk
I'll try to find out who did ours Steve. BTW, you want this stuff!
I know it's not too near you OP, but I got one from these people when we had our kitchen refitted in 2006:-
http://www.camberleyglass.co.uk/
They only supplied it, but it was pretty easy to glue to the wall and looked great. The only issue was it being a very tight fit in the space between the worktop and the cooker hood, but that was the kitchen fitters getting the hood slightly misaligned.
http://www.camberleyglass.co.uk/
They only supplied it, but it was pretty easy to glue to the wall and looked great. The only issue was it being a very tight fit in the space between the worktop and the cooker hood, but that was the kitchen fitters getting the hood slightly misaligned.
Speak to Scott at http://www.readingglassandmirror.co.uk/
All round good guy who knows his stuff and will supply to order.
HTH.
Cheers, Pewe.
All round good guy who knows his stuff and will supply to order.
HTH.
Cheers, Pewe.
Gassing Station | Thames Valley & Surrey | Top of Page | What's New | My Stuff