Custom Exhaust manufacturer

Custom Exhaust manufacturer

Author
Discussion

OilyRagMan

Original Poster:

3,846 posts

256 months

Sunday 9th June 2013
quotequote all
Can anyone recommend a good custom exhaust manufacturer for my westfield My muffler box is dying and the existing manifold if pretty rubbish. I have been recommended Torque Technique and vortex exhausts I was wondering if anyone knows someone a bit more local who could make one up. Its for an mk1 1.6 MX5 based car.

Thanks
ORM

spurs coupe

294 posts

181 months

Sunday 9th June 2013
quotequote all

How local?

I used PowerFlow in Slough when my midsilencer fell off and they put a straight through on in its place.

No complaints, very quick, works a treat and sounds great.

Not a complicated job though I suppose!


OilyRagMan

Original Poster:

3,846 posts

256 months

Sunday 9th June 2013
quotequote all
im in Bracknell, I don't mid traveling but torque technique is in salsbury which is a pain to get the car dropped off!

Jack LM

49 posts

252 months

Sunday 9th June 2013
quotequote all
Torque Technoque is on the Red3 bus route to the railway station - or enjoy a 35 min walk - then get the train home.

Nickyboy

6,704 posts

241 months

Sunday 9th June 2013
quotequote all
Liquid Metal Fabrications in Bicester, i know many peeps who have had work done there and are very impressed. They are very busy at the mo.

M400 NBL

3,529 posts

219 months

Monday 10th June 2013
quotequote all
I used these chaps to make a stainless steel exhaust for my kit car.

http://www.simpsonraceexhausts.com/

They are in the middle of nowhere though, so best to get dropped off. Having said that, Langley train station is probably 2 to 3 miles away if you know where you are going.

motco

16,228 posts

253 months

Monday 10th June 2013
quotequote all
Wunoff is my choice for my Westfield silencer. Wunoff

Justin S

3,657 posts

268 months

Monday 10th June 2013
quotequote all
I used a car builder solutions silencer on mine and is very nicely made. If you have a mazda kit, maybe the westfield standard manifold pipe and this silencer will work out cheaper than a full custom jobbie.

wackojacko

8,581 posts

197 months

Tuesday 11th June 2013
quotequote all
Edwards Motorsport in West Drayton are by far the best fabricators I've seen in a long time.

Small outfit that spends all money on equipment and customer satisfaction.


http://www.yell.com/b/Edwards+Motorsport-Exhaust+S...


I use them for all my exhaust/fabrication needs.

Terminator X

16,330 posts

211 months

Tuesday 11th June 2013
quotequote all
Hayward & Scott do custom stuff.

http://www.haywardandscott.com/contacts/

Fair old drive though as they're t'other side of M25 eek

TX.

ph1l5

5,025 posts

209 months

Wednesday 12th June 2013
quotequote all
Another thumbs up for Edwards

Jerry Can

4,683 posts

230 months

Wednesday 12th June 2013
quotequote all
OilyRagMan said:
im in Bracknell, I don't mid traveling but torque technique is in salsbury which is a pain to get the car dropped off!
http://mulgari.com/performance-exhaust-systems. They did a custom exhaust for me race car. Good chaps not too expensive and nice premises. BAsed about 5 miles away from Bracknell with easy parking for car and trailer. Owner is ex race tech and ex BMW Bracknell tech.



Edited by Jerry Can on Wednesday 12th June 18:26

OilyRagMan

Original Poster:

3,846 posts

256 months

Wednesday 12th June 2013
quotequote all
Thanks everyone, definatly a few people to contact biggrin

danc2019

1 posts

59 months

Thursday 12th December 2019
quotequote all
any idea where I can get dual exhaust back box (left and right side of bumper) for my astra h 1.9 cdti sri 150 im in Surrey

Vw nut

967 posts

98 months

Friday 13th December 2019
quotequote all
danc2019 said:
any idea where I can get dual exhaust back box (left and right side of bumper) for my astra h 1.9 cdti sri 150 im in Surrey
Where abouts in Surrey mate

edc

9,314 posts

258 months

Saturday 14th December 2019
quotequote all
Try Profusion Customs.

Saabaholic

292 posts

163 months

Monday 16th December 2019
quotequote all
LongLife Exhausts in Basingstoke.
Right next to the leisure park.

Saabaholic

292 posts

163 months

Saturday 7th March 2020
quotequote all
Just a FYI for everyone in the Berkshire area.

I was looking for a Custom Exhaust place yesterday, as i need an urgent Downpipe repair. And unfortunately Longlife Basingstoke are booked up for a month in advance pretty much.

After some searching i found a new place in Newbury, Just off the big Hambridge Rd crossroads.
Berkshire Garage. They build custom exhausts at very competitive prices compared to some of the others.

https://www.berkshiregarage.co.uk/


Mr Tidy

24,327 posts

134 months

Friday 13th March 2020
quotequote all
I bought a car in December with Powerflow back-boxes, but one didn't have the rear hanger on it for some reason.

So after finding Powerflow in Slough I rang on Wednesday and booked it in for this morning.

Naz cut a length of stainless bar, bent it to shape and welded it on in about 30 minutes for £30 - result!

Justin S

3,657 posts

268 months

Thursday 9th April 2020
quotequote all
Saabaholic said:
Just a FYI for everyone in the Berkshire area.

I was looking for a Custom Exhaust place yesterday, as i need an urgent Downpipe repair. And unfortunately Longlife Basingstoke are booked up for a month in advance pretty much.

After some searching i found a new place in Newbury, Just off the big Hambridge Rd crossroads.
Berkshire Garage. They build custom exhausts at very competitive prices compared to some of the others.

https://www.berkshiregarage.co.uk/
A mate bought a Direnza exhaust for his Focus ST, which was all over the place and the main issue was the tips were not welded on straight. He bought some different tips and this chap welded it all up for him and did a great job. So, can recommend him as well.