Any TVR's in Ontario

Author
Discussion

lenandsons

Original Poster:

1,317 posts

240 months

Tuesday 12th May 2009
quotequote all
Are there any TVR's here? If so can someone let me know the issues and costs of importing from the UK? If not is there a reason apart from costs?

Thanks

sawman

4,963 posts

237 months

Tuesday 12th May 2009
quotequote all
There was a chap on here the other week with a red wedge in ontario. he posted some pics one of the threads in readers cars (i think it was show us your rear or front end)

Terminator

2,421 posts

291 months

Wednesday 13th May 2009
quotequote all
lenandsons said:
Are there any TVR's here?
Thanks
http://www.tvrccna.org/canadian/index.html

As for importing, I believe that any car over 15 years can be imported without hassle, but check first!

smokin2


lenandsons

Original Poster:

1,317 posts

240 months

Wednesday 13th May 2009
quotequote all
Thanks for the replies. I would be looking at trying to get a 4.5 Cerbera over, is there any reason why this should be an issue apart from a cost perspective and RHD?

neejah

196 posts

233 months

Monday 1st June 2009
quotequote all
I looked into this with my Chim & and Alfa I had - to take to Gthe USA - GA.........rediculously expensive! There isn't any type approval for the TVR's so you could drive them on your foreign licence/passport for one year.......there's loads of info on the DMV website.

I gave up with the TVR and thought the Alfa would be OK - then I read it would need to go through inspections - CATS, warning lights, impact bars, bumpers, US ride height etc.....

There was one guy who had imported a Cerb to San-Francisco, but I think he was using the foreign passport/dl thing........I tried to contact him but without any luck.....

Bob_Defly

4,058 posts

238 months

Saturday 29th August 2009
quotequote all
There is a dark green L reg Griffith down the road from me (Waterloo, Ontario), no idea who owns it.

I would love to import a Griffith, it's relatively easy for any car over 15 years old, no restrictions really. So if you could get hold of a 96/97 Cerbera you would be able to import it in 2011. Although I'm not sure where you would get body panels from though if you crashed it.