Decent welder near Billericay?
Discussion
Suspension A-Arm.
I need the welds that hold a metal plate in place ground off.
The plate repositioned by 5mm and then welded back.
A mixture of seam and tack welds.
Not a huge job but it needs to be accurate and because it's a suspension part and the plate is structural, properly done.
I also need 16 bushings to be tacked in place.
Any suggestions - obviously I can go beyond Billericay but the nearer the better.
Thanks in advance...
I need the welds that hold a metal plate in place ground off.
The plate repositioned by 5mm and then welded back.
A mixture of seam and tack welds.
Not a huge job but it needs to be accurate and because it's a suspension part and the plate is structural, properly done.
I also need 16 bushings to be tacked in place.
Any suggestions - obviously I can go beyond Billericay but the nearer the better.
Thanks in advance...
I've used these several times for my ally work as I just can't justify buying a decent tig myself.they do good work and are very reasonable for cost.
http://finelimitwelding.moonfruit.com/
http://finelimitwelding.moonfruit.com/
garagewidow said:
I've used these several times for my ally work as I just can't justify buying a decent tig myself.they do good work and are very reasonable for cost.
http://finelimitwelding.moonfruit.com/
Thanks very much.http://finelimitwelding.moonfruit.com/
I had found them on Google and thought they looked the part but your endorsement pulls the trigger for me!
Gassing Station | Kent & Essex | Top of Page | What's New | My Stuff