engine tuners spalding/peterborough
Discussion
djhmonkeyboy said:
Hi does anyone know of a place where I could get my kit car tuned, I have a ford pinto with twin dellorto carbs and would like to get them tuned by a pro can anyone help?
I have only praise for Peter Baldwin - Wilsher Garages - Cambshttp://www.wilshers-garages.com/
He set up the ignition timing and jetted the carbs on my triple Dellorto converted 3.0 24V six pot engine - gained 40 bhp in one 2 hour session
He doesn't do programable ECU's or injection - just old fashioned carbs and movable distributors and he old works a couple of days a week so you normally have to wait a couple of weeks for a slot
Best bit of background I could find on him
https://www.diecastheroes.com/corgi-mini-7-mini-mi...
The car is in the corner of his workshop I believe
Tell him the lunatic with an triple carbed Opel Monza sent you - he'll remember it
Edited by B'stard Child on Friday 2nd January 10:23
Do I take it that this is the same Pete Baldwin who used to run a set of rollers in Jesus lane(?) Cambridge?
If so, then he set my Mk1 rs2000 up back in 1988 and it was superb after he fettled the old girl - 150bhp with just a gas flowed head, mild cam and a weber 38dgas.
Highly recommended for 'old skool' engines.
If so, then he set my Mk1 rs2000 up back in 1988 and it was superb after he fettled the old girl - 150bhp with just a gas flowed head, mild cam and a weber 38dgas.
Highly recommended for 'old skool' engines.
I'd be a bit sceptical of the rolling road figures he gives out but other than that a top bloke for tuning! Someone i know took her 1.6 Capri there that had been "warmed" a little and it came back with 116bhp???
BUT as i say, he certainly knows his bobbins and gets the best from an engine.
BUT as i say, he certainly knows his bobbins and gets the best from an engine.
Shortie123 said:
I'd be a bit sceptical of the rolling road figures he gives out but other than that a top bloke for tuning! Someone i know took her 1.6 Capri there that had been "warmed" a little and it came back with 116bhp???
BUT as i say, he certainly knows his bobbins and gets the best from an engine.
If you are refering to Peter Baldwin - his Dyno is a little on the generous sideBUT as i say, he certainly knows his bobbins and gets the best from an engine.
But I did a run on another rolling road 2 weeks before I went there and a confirmation run 1 week after - 40 bhp was the difference on both rollers
SCS / Supreme Car Services / Harvey Gibbs
Papyrus Road
Werrington
Peterborough
PE4 9BH
Telephone - 01733 576614
Website - www.specialistcarservices.co.uk
this contact is very well known and respected for his high standard of work - fords are his speciality.
Papyrus Road
Werrington
Peterborough
PE4 9BH
Telephone - 01733 576614
Website - www.specialistcarservices.co.uk
this contact is very well known and respected for his high standard of work - fords are his speciality.
Gassing Station | East Anglia | Top of Page | What's New | My Stuff