Good custom exhaust builder in Suffolk?
Discussion
I want to make my Cayenne Turbo sound a little better by taking out the secondary cats. The off the shelf replacement pipes to do this are fairly expensive (although simple), is anyone able to recommend a custom exhaust fabricator around here who could do that sort of thing?
I have used Chris Tullet before but he now only does high end motorsport work and isn't very local.
I have used Chris Tullet before but he now only does high end motorsport work and isn't very local.
http://demandengineering.co.uk/
got this saved in bookmarks , no personal experience but saw some work on another forum
got this saved in bookmarks , no personal experience but saw some work on another forum
My friend has an engineering company and makes all sorts of things, including custom exhaust for racecars etc. His work is top notch, he's also a gunsmith which hopefully shows how precise and detailed his work can be.
He will be able to help you out, unfortunately he is in Florida at the minute with his gf and daughter
however, you can email him on alexcollins484@btinternet.com and you might get a reply this week.
His unit is near Mendlesham, just off the A140.
good luck
BTW, he will probably recommend using V-band flanges for the replacement pipes. He loves V-bands
It also makes it very easy for you to replace/remove the pipes come MOT time...
Andy
He will be able to help you out, unfortunately he is in Florida at the minute with his gf and daughter
however, you can email him on alexcollins484@btinternet.com and you might get a reply this week.
His unit is near Mendlesham, just off the A140.
good luck
BTW, he will probably recommend using V-band flanges for the replacement pipes. He loves V-bands
It also makes it very easy for you to replace/remove the pipes come MOT time...
Andy
Edited by andycaca on Thursday 6th April 16:14
andycaca said:
piece of cake
out of interest, how much do the milltek items cost?
The Milltek ones cost about £300 but they only fit into the full Milltek system as the bore size is slightly different, which is £1k.out of interest, how much do the milltek items cost?
The off the shelf bolt in ones which fit the OEM system which are virtually identical are about £650 odd.
steveo3002 said:
http://demandengineering.co.uk/
got this saved in bookmarks , no personal experience but saw some work on another forum
+1 got this saved in bookmarks , no personal experience but saw some work on another forum
Demand were excellent - they made a complete stainless system from front to back for an A4 I had up until last week. Really nice guys, Golf GTI as a loan car and the quality of work is incredible.
Gassing Station | East Anglia | Top of Page | What's New | My Stuff