Epoxy Garage Flooring
Discussion
Did mine myself about a year ago with 2 part epoxy. After plenty of 'reading up' I rang Regal Paints in the UK to ask their advice. One coat of primer and two coats of high build epoxy later and I couldn't be happier. Don't try to clean the roller/tray/brushes, just throw them away each time. Apply thin and give it a good week to dry between coats. Harley.
A more expensive option but quite cool is this
Found in this thread http://www.pistonheads.com/gassing/topic.asp?h=0&a...
And available from here http://www.horsematshop.co.uk/210-the-stud-tile-50...
Found in this thread http://www.pistonheads.com/gassing/topic.asp?h=0&a...
And available from here http://www.horsematshop.co.uk/210-the-stud-tile-50...
crisp500 said:
Did mine myself about a year ago with 2 part epoxy. After plenty of 'reading up' I rang Regal Paints in the UK to ask their advice. One coat of primer and two coats of high build epoxy later and I couldn't be happier. Don't try to clean the roller/tray/brushes, just throw them away each time. Apply thin and give it a good week to dry between coats. Harley.
All this chemical control really has ruined good old 2 part Used to work with stuff that you mixed up and had to rush to get down on the floor before it went rock hard in the tub!
Biggriff said:
Went with the floor tiles. The Horsemat guys were very helpful and about half the price of everyone else. Will look the business when finished.
Please post up how it all goes and if they lock together well enough - was looking at epoxy but it means everything has to come out and then go back in again when driedGassing Station | East Anglia | Top of Page | What's New | My Stuff