Discussion
I'll mention it to my uncle who's a bit of a Fred Dibner old school engineer. He has a fully equipped engineering workshop at the end of his garden - it's a site to behold.
He's one of the few remaining engineers who served a long apprenticeship, been engineering all his life and now at 81 he's still a remarkable guy and can just about work miracles.
He's on the Wenvoe side of Cardiff if that helps.
He's one of the few remaining engineers who served a long apprenticeship, been engineering all his life and now at 81 he's still a remarkable guy and can just about work miracles.
He's on the Wenvoe side of Cardiff if that helps.
Thank you,
Let me know if he can help - or is interested (location/Wenvoe isn't a problem)
I'd much prefer to hand over the caliper to someone with a bit of "history" rather than have someone bodge the job.
I need to keep the bit thats stuck in there so I can work out what thread it is and get a new union.
Let me know if he can help - or is interested (location/Wenvoe isn't a problem)
I'd much prefer to hand over the caliper to someone with a bit of "history" rather than have someone bodge the job.
I need to keep the bit thats stuck in there so I can work out what thread it is and get a new union.
datasafe said:
I've tried ringing him a few times without success, I'll try again tomorrow. If you get it done elsewhere, just let me know.
Hi
thanks for the offer, but found a very good machinist who was just down the road from me.
After a trip to Merlin Motorsports yesterday, all my brake woes are over, well apart from putting it all back together and bleeding the system
Gassing Station | South Wales | Top of Page | What's New | My Stuff