Where to get cylinder head work done (track car)

[notfub]

I've got a spare Honda D16A9 1.6 16v cylinder head that needs;
1. replacment of valve stem seals
2. skimming (40 thou)
3. valve regrinding/reseating
4. smoothing of the ports and chambers to improve flow
5. intake and exhaust port matching

I'm tempted to just crack on and do this myself but am willing to let a seasoned pro work their magic, if one exists?

Cheers,
Dean

[Ti22]

speak to mike a t R-Motion I would mate.. darton rings a bell.

[Trev450]

If you don't mind a trip over to Gloucester: [e-mail]

[notfub]

Two good shouts there, thank you very much for taking the time to reply ;o)

[Ti22]

Tim radleys stuff is very good..

[notfub]

After contacting a few people suggested by Mike at R-Motion (who is a very helpful chap), I've ended up using the services of Dave Yandell Engine Services.
I should get the head back in a few weeks so will update this thread with my experiences for those interested.

http://r-motion.co.uk/
https://www.facebook.com/pages/DY-Engine-Services/...

[Earl Grey]

Be careful with the amount of work you do to the car, if you ever decide to race it, some of these mods may not be permitted in the regulations.
But if you intend on keeping it as a track car Enjoy