400se front brakes

[andy400se]

Please can someone advise me how to bleed the front brakes on my 1989 400se
the problem I've got is that each caliper has got 4 bleed nipples
is there a particular order that I should bleed them in ????

[shpub]

Keep going until there is no air.

I have seen specific orders recommended but in practice I just keep going round and make sure that I pump plenty of fluid through to remove any air trapped in the pipework. Be careful not to let the reservoir run low.

I would start at the top. Then the bottom and then the top again. Repeat until no air.

Steve