Christmas pressy
Discussion
Stig, I would love it, but don't have the cash right now.
Bloody neighbours are now forcing me to spend another £500 or so or so to move the gas pipe that leads to our property. When installed we were told by the gas company we had to route it above ground, now the neighbour has complained to the council and we are being told we have to bury it!
.
Of course in two years time when the gas company decides to put gas into our access road I will have to pay yet again to reconnect to the nearer gas pipe
.
Bloody neighbours are now forcing me to spend another £500 or so or so to move the gas pipe that leads to our property. When installed we were told by the gas company we had to route it above ground, now the neighbour has complained to the council and we are being told we have to bury it!

Of course in two years time when the gas company decides to put gas into our access road I will have to pay yet again to reconnect to the nearer gas pipe

According to Tim Lamont a 460 should be a genuine 265 bhp with good torque (about 285/290 lbs/ft IIRC). A 450SEAC is around 285bhp and 275 lbs/ft and a 420SEAC about 275bhp and 265lbs/ft. Performance should be similar to a SEAC. I assume a 218 cam and fibre plenum on Stig's car. Add some grunt if a twin plenum.
Gassing Station | Wedges | Top of Page | What's New | My Stuff