TVR 350i

[don350i]

Help!
took my 350i for a quick blast this morning, got home ok however I now seem to have a problem with the clutch pedal just pushing to the floor with no pressure and unable engage reverse or any gear!
When I try to engage reverse it sounds as though the clutch is not disengaging?
Any ideas on this would be welcome!
Thanks
Don

[mark387mw]

How’s the clutch fluid?
Has it drained away down the clutch pedal onto the floor?

[citizen smith]

Could be a slave cylinder problem. Have a look underneath at slave cylinder and see if it look wet.

[Wedg1e]

Either, any or both of the above... plus there have been cases of the actuating arm coming adrift within the bellhousing.

[mark387mw]

I see you sold it very quickly.

I’m sure the problem will be simple to fix.

[350zwelgje]

To complete the list of possibilities: pivot point piercing the clutch lever.

Had this, replaced with one with an additional metal plate that I welded on to the pivot location to strenghten it.

Rob