Free Bonnet for someone
Discussion
Can I add to the free bonnet list please OP.

Fits a S2 350i, although the heater intake is in a different place.
Two vents as per photo.
Stiffening sections breaking free from bonnet. Need rebonding.
Sound deadening loose.
More photos available.
Collect from Oban, west coast Scotland or it too is heading to the tip.

Fits a S2 350i, although the heater intake is in a different place.
Two vents as per photo.
Stiffening sections breaking free from bonnet. Need rebonding.
Sound deadening loose.
More photos available.
Collect from Oban, west coast Scotland or it too is heading to the tip.
pickleGM said:
Typical - I have one that doesn't fit - you have one I want but live a million miles away !
'tis always the way.the other thing to remember is these things are quite heavy, bigger than you think and rather ungainly.
I brought the original home on the roof of the volvo as part of a collection of body parts. This one was fitted to the 350i I bought but I refitted the original.
Also have front & rear bumpers and sills, all pretty rough condition. Was saving just in case but if they were any use and it made collecting the bonnet worthwhile.......Some other spares here, anything particular you need?
Skyedriver said:
Can I add to the free bonnet list please OP.

Fits a S2 350i, although the heater intake is in a different place.
Two vents as per photo.
Stiffening sections breaking free from bonnet. Need rebonding.
Sound deadening loose.
More photos available.
Collect from Oban, west coast Scotland or it too is heading to the tip.
Oooh, sorry I don't check this board very often. I can certainly take that off your hands at some point. I'm not sure when I'm next heading your way, but I'm over towards Dundee.
Fits a S2 350i, although the heater intake is in a different place.
Two vents as per photo.
Stiffening sections breaking free from bonnet. Need rebonding.
Sound deadening loose.
More photos available.
Collect from Oban, west coast Scotland or it too is heading to the tip.
wombat172a said:
Skyedriver said:
Can I add to the free bonnet list please OP.

Fits a S2 350i, although the heater intake is in a different place.
Two vents as per photo.
Stiffening sections breaking free from bonnet. Need rebonding.
Sound deadening loose.
More photos available.
Collect from Oban, west coast Scotland or it too is heading to the tip.
Oooh, sorry I don't check this board very often. I can certainly take that off your hands at some point. I'm not sure when I'm next heading your way, but I'm over towards Dundee.
Fits a S2 350i, although the heater intake is in a different place.
Two vents as per photo.
Stiffening sections breaking free from bonnet. Need rebonding.
Sound deadening loose.
More photos available.
Collect from Oban, west coast Scotland or it too is heading to the tip.
Not sure how to pm photos so here's a couple I did earlier


Edited by Skyedriver on Friday 21st May 19:11
pickleGM said:
tried everything now to give this away - please someone come take it - hate to chop it up but I just can't keep stuff i don't need
Crazy isn't it. And a week after you dump it there'll be a "has anyone got a spare bonnet?"I've a small open ended shed where I keep the ride on mower. The old bonnet makes a decent half door/weather protection.....
Gassing Station | Wedges | Top of Page | What's New | My Stuff