Starter relay connection

[KKson]

Went to do the weekly Morrisons shop in the 390. After loading up with full bags the starter wouldn't crank. Opened up the relay board and found the black double earth connection spade had broken off. I've managed to botch it back together to give me a connection but the spade is not a standard one. It fits on to the end of the wire then pushes into the relay terminal block but the relay connector has four spring steel "fingers" that accept the relay spade. I've an assortment of standard spade connections but none will fit back into the relay connector block. Any one any clues where or if you can still get the fancy connectors? if not then I might have to swap the existing block out for a more modern unit and re-crimp new connectors.

[Penelope Stopit]

Are these any good to you, the crimp part of these is at 90 degrees to the part that accepts the relay spade but they can be found with standard orientation




https://www.12voltplanet.co.uk/terminal-for-63mm-r...

[KKson]

Thanks Penelope, that's exactly what I'm looking for. Cheers.

[Penelope Stopit]

Glad to be of assistance. There is also the below type that doesn't have the strengthening


http://en.escubedo.com/download/referencia/Pt8441....

http://en.escubedo.com/products/by-range/up-tim/6-...