Great Auto/Aircon Electrician in please?
Discussion
Hi,
Would anyone be able to recommend an good auto electrician in the Lothian/Central/Fife region please?
My aircon is playing up and I'd like to avoid Graypaul labour charges if at all possible!
More detail below if anyone has any clues...Thanks
Symptoms:
- vents tend to blow just hot no matter what the temperature dial is set to
- a while ago, stopping the engine, key out, key in and then restarting often corrected it, however this works less and less, and practically never now
- a few times it's only ever delivered chilled air with no heat, rare though
What I know:
- Gas has been tested and is fine
- Compressor is not ceased, can be moved by hand
- Econ light (aircon off) comes on and off when selected
- The temperature dial works as when moved to the left extreme it switches the circulation light on as it should
- The problem is intermittent, less reliable than it used to be, now hardly ever works, but did this afternoon for some reason I don't know
Possible:
- a control actuator or control flap maybe stuck or not moving properly?
- electrical problem where control signals are not being sent/picked-up?
Oh, it's Italian, which although explains a lot, I'm sure it could be made to work again!
Would anyone be able to recommend an good auto electrician in the Lothian/Central/Fife region please?
My aircon is playing up and I'd like to avoid Graypaul labour charges if at all possible!
More detail below if anyone has any clues...Thanks
Symptoms:
- vents tend to blow just hot no matter what the temperature dial is set to
- a while ago, stopping the engine, key out, key in and then restarting often corrected it, however this works less and less, and practically never now
- a few times it's only ever delivered chilled air with no heat, rare though
What I know:
- Gas has been tested and is fine
- Compressor is not ceased, can be moved by hand
- Econ light (aircon off) comes on and off when selected
- The temperature dial works as when moved to the left extreme it switches the circulation light on as it should
- The problem is intermittent, less reliable than it used to be, now hardly ever works, but did this afternoon for some reason I don't know
Possible:
- a control actuator or control flap maybe stuck or not moving properly?
- electrical problem where control signals are not being sent/picked-up?
Oh, it's Italian, which although explains a lot, I'm sure it could be made to work again!
Hi Dave, you could ask Graeme at RPM in Glasgow.
1987, Maryhill Rd, Glasgow, Lanarkshire G20 0BT
Tel: 0141 946 0666
Paul Ingram as a referral would maybe help us both.
He tends to be mostly Porsche/Ferrari/Audi/Merc/BMW but I'm sure he has Masa customers.
Ryan/Dougie there are also very helpful but Graeme is the owner.
cheers
Paul
1987, Maryhill Rd, Glasgow, Lanarkshire G20 0BT
Tel: 0141 946 0666
Paul Ingram as a referral would maybe help us both.
He tends to be mostly Porsche/Ferrari/Audi/Merc/BMW but I'm sure he has Masa customers.
Ryan/Dougie there are also very helpful but Graeme is the owner.
cheers
Paul
Gassing Station | Scotland | Top of Page | What's New | My Stuff