RSL Motors, Aberdeen

RSL Motors, Aberdeen

Author
Discussion

8bit

Original Poster:

4,973 posts

161 months

Tuesday 2nd May 2017
quotequote all
Anyone used these guys? Any good?

Rickeh

246 posts

221 months

Saturday 6th May 2017
quotequote all
I have in the past as they were pretty close to where I lived but it was a bad experience and I would not do it again.

8bit

Original Poster:

4,973 posts

161 months

Monday 8th May 2017
quotequote all
Thanks, noted.

Bpirie1000

17 posts

146 months

Wednesday 10th May 2017
quotequote all
What are you needing done?

Try this guy in Westhill

https://en-gb.facebook.com/DJ-Automotive-Engineeri...

Quick turn around, faultless job.

8bit

Original Poster:

4,973 posts

161 months

Thursday 11th May 2017
quotequote all
I found RSL when searching for a garage that has Autologic and has the JLR module for it. I fitted a heated steering wheel to my XKR but it requires configuration in the car's computer systems to start working. I have since discovered that Autologic even with the JLR module can't do this, it'll have to be the official JLR diagnostic and configuration software. I gather RSL are a Landrover/Rangie specialist so they may still have it but the feedback so far hasn't been positive.

stewartduthie1

2 posts

78 months

Wednesday 4th April 2018
quotequote all
We have the autologic computor for landrovers only. We dont and have not for jaguar system, so its a differant purchase im affraid . This system is expensive so we use differant computor on jags.
If the system could configure for a heated s wheel on s landrover but if didnt come from factory cant fo it, i checked with l rover as well ,
We repair lots of landrovers as well as every other car type, and try hard to be helpfull and honest with 33 years of service in the Bridge of Don.
Sorry to hear that some folk feel i didnt try hard enough , thats not how we operate and glad to help anyone
Rsl motors

8bit

Original Poster:

4,973 posts

161 months

Thursday 5th April 2018
quotequote all
Stewart, thanks for taking the time to post. As it turned out, the only way to do it was using the official JLR diagnostic software called SDD, Autologic, Auto Enginuity etc. couldn't do it. It was a bit of a hack even with the JLR software because the heated wheel was not an aftermarket official accessory, it was factory fit only. Anyway thanks again for posting.

stewartduthie1

2 posts

78 months

Thursday 5th April 2018
quotequote all
Glad u got it configured and working
With a Range Rover if not fitted as standard new can’t be done
The problem folk have is no one accepts it and don’t believe you when you tell them
I have invested thousands on l rover and get updates etc and can get advice if needed so I’m being honest with people .