Really daft ask

[S2red]

Anyone in North Glasgow skilled in "pulling" out dents?

Not in car but fridge door !

Two 1p sized indentions on door

Ever an opitmist

[rash_decision]

Just buy a couple of decent sized fridge magnets!!!

[S2red]

That suggestion did not go down well :-)

[BillyWhizz888]

Sink plunger

[sherman]

Rough up the holes with some sandpaper and a bit of polyfila in each hole will see it good as new.

Sure you can get white duct tape to cover the holes with

Or you could ask your local paintless dent repair guy for a quote. You dont know until you ask.

[horza]

Aren't small dents pushed out from behind rather than pulled?

No way for tool to get pushed inside a fridge door I would think.

So that's a second for the fridge magnets then!




Alternatively I suppose you could try and replace the door.

[S2red]

New door Over £200

[BubblesNW]

BillyWhizz888 said:

Sink plunger

I thought that was a joke until I watched a couple of YouTube videos. Certainly worth a try.

[BillyWhizz888]

Yeh sorry was a quick reply as was busy.

You get suction cups for dents in different sizes depending on the size of the dent

[mickyc79]

hair dryer and can of air (lie for cleaning your computer keyboard).

Heat dent until its warm to touch, but not bubbling paint, then blast close up with air can...should pop right out.

works with dry ice as well if you can get a hold of any.