Underseal - Aberdeen/shire

Underseal - Aberdeen/shire

Author
Discussion

downthepub

Original Poster:

1,382 posts

213 months

Wednesday 31st August 2016
quotequote all
Looking for recommendations on who can professionally apply underseal in the North-east.

Got a Mustang on order but by all accounts the underseal that Ford Europe can just about be bothered to apply to the cars in Zeebrugge is pretty wk. So rather than tiring myself out beating up the dealer, think I'll just get it done myself. The car will be a keeper, so want it done right. A colleague got his done at a place in Glasgow, but ICBA going that distance just for underseal.

mon the fish

1,448 posts

155 months

Thursday 1st September 2016
quotequote all
Try North East Autobody on Ashley Lane

istoo

2,365 posts

209 months

Thursday 1st September 2016
quotequote all
you bought something that doesnt go through mud.. at last! Give us a shout when your 'next door' again...

I did underseal myself last time, but Warren at NE Autobody had a cracking etype for a full rebuild when i was last in. some years ago mind you. And does look after some older cards (or american wink)

downthepub

Original Poster:

1,382 posts

213 months

Thursday 1st September 2016
quotequote all
Ashley Lane is just round the corner, thanks guys.

Ian, yeah, the Jeep was sold in the beginning of January, wanted to sell it whilst there was some value in it ie no where near MOT time! Was getting tired of driving such a rough vehicle and could never really trust it. The Mustang has been the plan for a few years now. Hoping to get an October build date (missed September), which would mean the car will be here in the New Year.

8bit

4,999 posts

162 months

Wednesday 22nd November 2017
quotequote all
downthepub said:
Ashley Lane is just round the corner, thanks guys.

Ian, yeah, the Jeep was sold in the beginning of January, wanted to sell it whilst there was some value in it ie no where near MOT time! Was getting tired of driving such a rough vehicle and could never really trust it. The Mustang has been the plan for a few years now. Hoping to get an October build date (missed September), which would mean the car will be here in the New Year.
Thread resurrection time... Did you ever get this done? The nice MOT tester that passed my car back in July pointed out a couple of areas of minor surface rust and exposed metal underneath it and suggested it might be wise to get them rubbed back and sealed so I'm keen to find somewhere that can sort this out.

downthepub

Original Poster:

1,382 posts

213 months

Wednesday 22nd November 2017
quotequote all
Have to admit that I haven't, been a master of procrastination and it seems non-urgent with a new shiny car. It's at the back of my mind though!

8bit

4,999 posts

162 months

Thursday 23rd November 2017
quotequote all
No worries, thanks anyway - think I'll give them a ring anyway based on the strength of the existing recommendations, I'll report back if I go ahead.

bangy1

107 posts

150 months

Thursday 23rd November 2017
quotequote all
If Warren at NE can't fit you in I got my GTi undersealed with Dinitrol at Castle park in Ellon and was very pleased with service, car was taken in all the liners etc removed, cleaned underneath and any surface bits rubbed down. Then the car was undersealed in the cavities also using the dinitrol and left to dry. Neil there was spot on and sent me pics before and after and had the car for a total of 3 days or so.

mazdajason

1,113 posts

179 months

Thursday 23rd November 2017
quotequote all
Care to share a ballpark cost?

8bit

4,999 posts

162 months

Thursday 23rd November 2017
quotequote all
Thanks all. Any rough idea what sort of cost I can expect for this sort of thing?

xu5

683 posts

164 months

Friday 24th November 2017
quotequote all
I can also recommend Castlepark Autobody, they did my brand new MX5 in September using Dinotrol in all cavities and underneath for £400 ish.

xu5

683 posts

164 months

Friday 29th May 2020
quotequote all
I have another car I would like rust proofing, but Castlepark no longer offer the service frown due to the mess it creates in their workshop.

Any further suggestions? I have contacted North East 4 by 4 in Stonehaven who are apparently authorised Dinotrollist's.

two4oneuk

71 posts

133 months

Friday 29th May 2020
quotequote all
I had my vxr8 done at protect and preserve outside Glasgow. 5 min walk to local station and plenty trains back and forth. Superb service.

mazdajason

1,113 posts

179 months

Friday 29th May 2020
quotequote all
I was going to say preserve and protect too. Not a personal recommendation but only heard good things about their work.

downthepub

Original Poster:

1,382 posts

213 months

Friday 29th May 2020
quotequote all
My latest plan is to get AW Autotech to do the biz when they reopen next week. Although interesting that Titch at NE4x4 does the Dinitrol stuff. Hmmm.

Edited by downthepub on Friday 29th May 22:27

Hollowpockets

5,908 posts

223 months

Tuesday 2nd June 2020
quotequote all
Stewart Roden down near Edinburgh did the underseal on my Vantage while doing the service. Fairly priced and top job.

bangy1

107 posts

150 months

Friday 5th June 2020
quotequote all
I was in the same boat us you as had used castlepark before. My mate recommended me The Thin Blue Line in Daviot just outside Inverness who are a Dinitrol agent so I put my Civic to him and was very pleased with the job done.

gerrith

21 posts

97 months

Monday 13th July 2020
quotequote all
I’m sure I read that DJ autos in Westhill do this service.

Have only ever used them for servicing and MOT’s but no complaints.

Rod200SX

8,099 posts

183 months

Thursday 16th July 2020
quotequote all
gerrith said:
I’m sure I read that DJ autos in Westhill do this service.

Have only ever used them for servicing and MOT’s but no complaints.
DJ have done a couple friends underseal, one a fresh import and a couple others just older cars needing to stay fresh. All pretty good jobs!

bangy1

107 posts

150 months

Tuesday 2nd November 2021
quotequote all
Hi folks thread resurrection time!

I was wondered if anyone knew of anyone still doing this as all of the ones previously mentioned in the thread do not seem to offer this service any more.

Cheers