Geometry check in or around Harrogate

Geometry check in or around Harrogate

Author
Discussion

talkwrench

Original Poster:

909 posts

240 months

Friday 19th January 2007
quotequote all
Hi folks.
Just about to fit a new quick steering rack on my S1 Elise and have recently fitted S2 suspension. I'll obviously need a full geo when Ive finished. The car is currently in Harrogate. Can anyone recommend a decent local place to have the geometry checked properly. Your average kwik fit is clearly not quite up to the job.
Thanks!

pbsaxman

977 posts

232 months

Friday 19th January 2007
quotequote all
I have the same need for the scooby over here in Brid. It seems to be understeering dramatically (more so than usual in a scoob) and having checked tyres and pressures can see no faults. However the tyres don't seem to be wearing unevenly which I would expect if the geo was well out?????????

Could be I'll have to speak to the 'not so local' scooby garage but it's only been a problem since they serviced it scratchchin

talkwrench

Original Poster:

909 posts

240 months

Saturday 20th January 2007
quotequote all
The Lotus boys came up with a couple of suitable places, just in case you're interested.

www.pistonheads.co.uk/gassing/topic.asp?t=346623&f=15&h=0


Edited by talkwrench on Saturday 20th January 13:51

ginettajoe

2,106 posts

225 months

Sunday 21st January 2007
quotequote all
talkwrench said:
Hi folks.
Just about to fit a new quick steering rack on my S1 Elise and have recently fitted S2 suspension. I'll obviously need a full geo when Ive finished. The car is currently in Harrogate. Can anyone recommend a decent local place to have the geometry checked properly. Your average kwik fit is clearly not quite up to the job.
Thanks!


You couldn't do much better than look here:-

www.blinkmotorsport.com

pbsaxman

977 posts

232 months

Monday 22nd January 2007
quotequote all
talkwrench said:
The Lotus boys came up with a couple of suitable places, just in case you're interested.

www.pistonheads.co.uk/gassing/topic.asp?t=346623&f=15&h=0


Edited by talkwrench on Saturday 20th January 13:51


Cheers Michael, I'll do some phoning around.

Peter