Wheel refurb recommendations (Warrington-ish area)
Discussion
All being well, I may be the owner of a new car come next week. The wheels are flaking though and need a refurb.
Firstly, roughly how much per corner for 20" alloys? The other issue is I don't have a spare set so do companies loan you some, or can I just rotate and use the full size spare and make 4 separate trips?
Also looking for recommendations of somewhere Warrington-ish area
Firstly, roughly how much per corner for 20" alloys? The other issue is I don't have a spare set so do companies loan you some, or can I just rotate and use the full size spare and make 4 separate trips?
Also looking for recommendations of somewhere Warrington-ish area
http://www.nationalalloys.co.uk/
These are based just outside widnes (warrington side) and Ive heard they are pretty good.They did a lot of BMW m3 polished rims and got good reviews on the M3 forum I was a member of a while ago.
I actually used them a few times many years ago when they were based in prescot under a different name and was always happy with the job they did.
Not sure about loan alloys but I know you can leave your car with them and they will do them all in a day.Best not to keep going back and too like you said on different days as you could get a colour difference.
Out of intrest what car is it with 20in rims>
These are based just outside widnes (warrington side) and Ive heard they are pretty good.They did a lot of BMW m3 polished rims and got good reviews on the M3 forum I was a member of a while ago.
I actually used them a few times many years ago when they were based in prescot under a different name and was always happy with the job they did.
Not sure about loan alloys but I know you can leave your car with them and they will do them all in a day.Best not to keep going back and too like you said on different days as you could get a colour difference.
Out of intrest what car is it with 20in rims>
3sixty said:
Thanks Ned, never refurbed any before and assumed it would be an overnight job but if they can finish it in a day, even better.
It's a D3 A8
I suppose it depends on the rims and what kind of finnish you want but I used them 3 times and each time it was a one day turn around though it must be 7-8 years ago when I last had some done.It's a D3 A8
Gassing Station | North West | Top of Page | What's New | My Stuff