another noob!!!
Discussion
Thanks for the comments guys
and as for modifying, spanners look better on the shelf in halfrauds than in my hands!!
but i'm quite lucky as the previous owner in japan, fitted this!!
apparently it's a fujitsubo legalis-ti! titanium back box and centre section sounds astounding
all i'm planning is replacing the nissan burgers with some "Z" ones, some gas strut bonnet lifters and a new head unit.
Dave
and as for modifying, spanners look better on the shelf in halfrauds than in my hands!!
but i'm quite lucky as the previous owner in japan, fitted this!!

all i'm planning is replacing the nissan burgers with some "Z" ones, some gas strut bonnet lifters and a new head unit.
Dave
Dave I'm just down the road from Bishop mate, we will have to meet up and see if we can sort out a meet. Work in the motor industry so quite busy but take Fridays and every other sunday off, let me know if you fancy a run out one day.
Regards Phill
Regards Phill
Edited by Megane230F1 on Sunday 23 September 21:21
Stu, i might take you up on that offer, as it's a toss up between me and the cats who's best with the spanners!!
And especially as the missus has a thing for skylines!! we nearly bought a lovely unmolested R32 GT-r in feb, if i had i wouldn't be in the zed!
I'd heard about decatting it but as you may have guessed if there isn't a button on the dash to decat it i havent got a clue where to start!!
Dave
And especially as the missus has a thing for skylines!! we nearly bought a lovely unmolested R32 GT-r in feb, if i had i wouldn't be in the zed!
I'd heard about decatting it but as you may have guessed if there isn't a button on the dash to decat it i havent got a clue where to start!!
Dave
Well if there's anything you need to know about with regards to tuning or fitting stuff feel free to fire me an email through my profile and I'll help wherever possible mate.
Decats are a doddle, all it does is replace the cat with a straight through pipe and increase flow. Fitting them is a piece of cake, so swapping them out come MOT time (unless you've got a mate who MOT's
) takes no more than a few minutes.
If you go that way you might want to consider a set of front pipes, again, takes nothing to fit them and they make a good difference. More noise (Z33's sound great when they can breathe), nice occasional flame on overrun, and more performance, what more could you want.
Loads of other good stuff worth getting for them, just depends on whether you want to tinker with it (course you do
) or not and how deep your wallet is, addictive isn't the word, I've got the credit card bills to prove it 
Hope to catch you soon mate, I'm quite often around your neck of the woods in the Skyline so I'm sure we'll cross paths soon enough
If anyone fancies another run out I'm well up for it and I know a couple of others are too, perhaps squeeze one decent length run out before the crap weather arrives in force?
Cheers,
Stu
Decats are a doddle, all it does is replace the cat with a straight through pipe and increase flow. Fitting them is a piece of cake, so swapping them out come MOT time (unless you've got a mate who MOT's

If you go that way you might want to consider a set of front pipes, again, takes nothing to fit them and they make a good difference. More noise (Z33's sound great when they can breathe), nice occasional flame on overrun, and more performance, what more could you want.
Loads of other good stuff worth getting for them, just depends on whether you want to tinker with it (course you do


Hope to catch you soon mate, I'm quite often around your neck of the woods in the Skyline so I'm sure we'll cross paths soon enough

If anyone fancies another run out I'm well up for it and I know a couple of others are too, perhaps squeeze one decent length run out before the crap weather arrives in force?
Cheers,
Stu
Gassing Station | North East | Top of Page | What's New | My Stuff