Need a good welder this week!
Discussion
Does anyone know of a decent (automotive) welder preferably in North london/Essex/Herts who can fabricate a seat mounting and help me mount a seat in my 205 track car?
Need to lower the seat by cutting out the standard seat mounts which are pants and then weld in two struts from the sill to the gearbox tunnel then mount the seat on those. should be about 3 - 4 hours work?
thanks Jonny.
Need to lower the seat by cutting out the standard seat mounts which are pants and then weld in two struts from the sill to the gearbox tunnel then mount the seat on those. should be about 3 - 4 hours work?
thanks Jonny.
remember to weld in spreader plates on like so -
I wish I could recruit this dude to do all my welding.
My welder is on holiday so that does not really help you. I will happily lend a hand adjusting seats etc if you need. This takes alot longer than you think. I will happily tack things into place for you in the name of adjustment.
Have you made the spreader plates and cut the bars to size and profiled the edges?
I wish I could recruit this dude to do all my welding.
My welder is on holiday so that does not really help you. I will happily lend a hand adjusting seats etc if you need. This takes alot longer than you think. I will happily tack things into place for you in the name of adjustment.
Have you made the spreader plates and cut the bars to size and profiled the edges?
Gassing Station | London | Top of Page | What's New | My Stuff