Tyres/Shock Absorbers
Tyres/Shock Absorbers
Author
Discussion

tom traynor

Original Poster:

28 posts

190 months

Friday 21st January 2011
quotequote all
Hi All,I'm seeking some advice on sourcing. During the last MOT there were a number of advisories most of which I have sorted, leaving only a replacement set of front tyres (rears look to be nearly new) and a slight misting of oil on the near side shock absorber.

The tyres currently on the front are Bridgestone 205/60/ZR15 and on the rear Bridgestone 225/50ZR16. As I am replacing just the front, do I need to keep the same tyres or can I use a different make provided they are on the same axle? Also anyone got any advice on the best places/site to look in terms of quality and price.

Finally, while the shock absorber is only an advisory I think I will change it. The shockers currently on the car look like the original Koni adjustable ones and I would like to keep them the same. Can anyone tell me the part number for the fronts and the best place to source a set.

Thanks in anticipation......Tom

v8s4me

7,275 posts

248 months

Friday 21st January 2011
quotequote all
This was the response I got from Koni when I contacted them last November

Unfortunately we dont provide a kit for your car.
Sorry for thew inconvenience.
Kind Regards
Chris Noble
Customer Support.



Gerald-TVR

4,896 posts

226 months

Friday 21st January 2011
quotequote all
tom traynor said:
The tyres currently on the front are Bridgestone 205/60/ZR15 and on the rear Bridgestone 225/50ZR16.
Front 15" rears 16", are you sure? What wheels are they?

tom traynor said:
do I need to keep the same tyres or can I use a different make provided they are on the same axle? Also anyone got any advice on the best places/site to look in terms of quality and price.
Should be OK for different tyres front to rear but personally I would stick to the same. This thread might help but I would be more concerened about the age of the rubber

tom traynor said:
Finally, while the shock absorber is only an advisory I think I will change it. The shockers currently on the car look like the original Koni adjustable ones and I would like to keep them the same. Can anyone tell me the part number for the fronts and the best place to source a set.
Its an after market set you will have to have and that means changing all four, speak to Derek at Absolute Shocks http://www.absolutelyshocks.com/ he cant be more helpful

Norman

tom traynor

Original Poster:

28 posts

190 months

Friday 21st January 2011
quotequote all
Norman, Thanks for the reply. The wheels are from a Chimaera, already on the car when purchased. The measurements I listed where taken from the tyres.Is it a problem having different sizes front to rear?

Having checked further it seems the back shockers are AVO so I assume the front ones are the same.While the rears have a label the front ones do not. Is the e-mail adress you gave good for all shocks and will I need to buy new springs.........Sorry for all the questions but it has been years since I actually owned a car, lucky enough to have a company one.

Thanks again.....Tom

phillpot

17,510 posts

212 months

Friday 21st January 2011
quotequote all
tom traynor said:
Having checked further it seems the back shockers are AVO so I assume the front ones are the same.While the rears have a label the front ones do not.
AVO UK Ltd. Tel:01604 708101 (or google for email address) will be able to service/repair them.

Barkychoc

7,848 posts

233 months

Friday 21st January 2011
quotequote all
Look at the spacing between the spring coils - original springs are variable rate so at one end the coils are close together getting progressively further apart towards the other end.

After market springs are single rate and have consistent spacing between the coils from one end to the other.

tom traynor

Original Poster:

28 posts

190 months

Friday 21st January 2011
quotequote all
Thanks all for the info,

I have dropped an e-mail to AVO so hopefully I will be able to get them serviced.

I will let you know how I get on......Tom

Gerald-TVR

4,896 posts

226 months

Friday 21st January 2011
quotequote all
tom traynor said:
Norman, Thanks for the reply. The wheels are from a Chimaera, already on the car when purchased. The measurements I listed where taken from the tyres.Is it a problem having different sizes front to rear?
I guess not as long as the car feel and handles OK

tom traynor said:
Having checked further it seems the back shockers are AVO so I assume the front ones are the same.While the rears have a label the front ones do not.
Nigel is the person to contact at AVO I took my AVO's there and they checked and rebuilt as necessary, they might be able to put new seals in the leaking one (if its AVO) and save you some dosh

Dont worry about the questions we've all been there

Norman

tom traynor

Original Poster:

28 posts

190 months

Friday 21st January 2011
quotequote all
Norman,

The car handles like a dream although I do not drive it too harshly.

Thanks for the AVO Name.........Tom

tom traynor

Original Poster:

28 posts

190 months

Friday 21st January 2011
quotequote all
Thanks all for the info,

I have dropped an e-mail to AVO so hopefully I will be able to get them serviced.

I will let you know how I get on......Tom

phillpot

17,510 posts

212 months

Friday 21st January 2011
quotequote all
Barkychoc said:
After market springs are single rate and have consistent spacing between the coils from one end to the other.
nono bought my AVO's c/w progressive springs from David Gerald TVR