Spot Caliper
Spot Caliper
Author
Discussion

Alan Whitaker

Original Poster:

2,054 posts

211 months

Saturday 26th June 2010
quotequote all
Hi All.
Anybody know if you can use a rear handbrake calipers as a handbrake, I have Wilwood 4 pots on the rear so I have no mechanical handbrake, I was just thinking of using a blanked off Ford caliper. I know there are Hi-Spec and Compbrake that do them but I was just trying to use things in the shed.

Any help appreciate.


Alan

magpies

5,204 posts

211 months

Saturday 26th June 2010
quotequote all
I can't see any problem in using a dedicated handbrake calliper - the mot only require a 'mechanical means' to slow the car down (specified g force) it does not state how it is achieved. The LandRover has a drum in the propshaft and nowhere near the wheels.

Barkychoc

7,848 posts

233 months

Saturday 26th June 2010
quotequote all
I think it would work OK - but might need a little thought in terms of the hydraulic fittings - if you blank them off won't that give you problem with caliper movement - i.e. the trapped air may stop it moving properly?

Alan Whitaker

Original Poster:

2,054 posts

211 months

Sunday 27th June 2010
quotequote all
Hi Chris.
Good point, I could just run a vent pipe to the boot same as they do on the landrover rear axle to keep the water out.

Many Thanks

Alan