Headlights
Headlights
Author
Discussion

johnnywgk

Original Poster:

2,579 posts

211 months

Tuesday 16th March 2010
quotequote all
Done a search and want to know if these will be ok.


Stafford Vehicle Components

7" headlight assembly

S5812B 7" halogen with side light UK dipping

£68 pair + £8 P&P

Then just fit my old chrome rims on them, maybe have to change conectors. Think i got this right, but just wanted to double check, cheers.

phillpot

17,510 posts

212 months

Tuesday 16th March 2010
quotequote all
They sound about right but you may want to take a look at www.jamespaddock.co.uk They are Triumph specialists but 7" headlamps fit loads of cars

end of last year I paid £34 (inc. p&p and vat) for a pair of genuine Lucas H4 Halogen units complete with bulbs and sidelights scratchchin

HTH mike.

ETA just taken a look at "your ones" , they are complete with bowl, adjusters, retaining bezel etc. Do you need all that ?

Edited by phillpot on Tuesday 16th March 19:29

johnnywgk

Original Poster:

2,579 posts

211 months

Tuesday 16th March 2010
quotequote all
Cheers for the Mike, but i need the chrome inner ring that adjusts the lights (up/down, left/right) aswell as the reflectors.

I only really need,

2X reflectors
1X inner chrome (adjustable bit)

All the rest is ok.

NORMAN (sorry to shout) are you out there lol

johnnywgk

Original Poster:

2,579 posts

211 months

Tuesday 16th March 2010
quotequote all
Mike, didn't want to risk too much mix n match, so thought these would fit, and my outer chrome rims would fit them, with minor additions, like connections.

Gerald-TVR

4,896 posts

226 months

Tuesday 16th March 2010
quotequote all
Hi Johnny

Yep I'm here but aint got headlight bits. My advice for what its worth is to replace the lot, its much easier. The inner chrome ring is sepcific to the bowl.

I woulod suggest that you get these

http://www.s-v-c.co.uk/prod/light-bowls.html

and these

http://www.s-v-c.co.uk/prod/wipac-quadoptic.html with the uprated H4 halogen and built in side lights, huge improvement, its what I fitted to Gerald.

I also fitted new rims http://www.s-v-c.co.uk/prod/chrome-rims.html just a question of making and fitting new little brackets



Having said all that if I were doing it again I woulod be tempted by this

http://www.hidcity.co.uk/preview/?page_id=204&...

Edited by Gerald-TVR on Wednesday 17th March 07:41

phillpot

17,510 posts

212 months

Tuesday 16th March 2010
quotequote all

understand what you mean, in theory any makes should "mix and match" Lucas, Wipac, Cibie etc etc....

But having said that I seem to recall the Lucas units didn't quite sit right in the location lugs (old units were Cibie I think), they took a little adjusting so getting the "whole package" may not be a bad idea !
might just be worth asking what make the lamp units are, a known manufacturer or Chinese copies ????

Gerald-TVR

4,896 posts

226 months

Wednesday 17th March 2010
quotequote all
No fitting issues with the bits listed above, fitted a treat.

johnnywgk

Original Poster:

2,579 posts

211 months

Thursday 18th March 2010
quotequote all
Cheers for the help, i went for the H4 thingys, now all i need is 1 inner chrome ring, the one that adjusts the beam.

Not been on for a couple of days, went into shop and bought the H4 thingys, they fit perfect.

I just want to get the car on the road, for the weekend. Fingers crossed.