Steering Wheel
Steering Wheel
Author
Discussion

assynt road

Original Poster:

379 posts

216 months

Wednesday 10th February 2010
quotequote all
Hi guys, anyone know the diameter of their 's' steering wheel? Got a 13'' aftermarket wheel on my S1 and it is quite stiff to turn at low speeds. I was wondering if the standard wheel was any bigger, or if not if anybody had fitted a larger one to make turning easier. If the standard one is larger has anyone got one? Thanks in advance, Steve.

graham kay

95 posts

206 months

Wednesday 10th February 2010
quotequote all
I've got a standard one you can have, I don't know the dimensions as it's locked in my workshop but i'll measure it tomorrow when i go to work.

phillpot

17,511 posts

212 months

Wednesday 10th February 2010
quotequote all
Standard wheel is only about 13 and half inches outer diameter !

Steering was very heavy on mine when I bought it and also considered a larger steering wheel but after a new pair of column uj's, bit of a front suspension overhaul and new tyres its not too bad (or maybe I'm just getting used to it)but would have to admit 3 point turns aren't much fun !!

assynt road

Original Poster:

379 posts

216 months

Wednesday 10th February 2010
quotequote all
Thanks for the replies guys, and the offer Graham. I think I'll investigate how big a wheel will fit, without removing my legs that is!

Edited by assynt road on Wednesday 10th February 22:56

Barkychoc

7,848 posts

233 months

Thursday 11th February 2010
quotequote all
It might be my imagination but some of the early S1 steering wheels look a bit bigger than the later 'personal' wheel to me.

thegamekeeper

2,282 posts

311 months

Thursday 11th February 2010
quotequote all
TVR offered a slightly larger 4 spoke option to people who found steering heavy. Think I,ve still got a new one in loft somewhere. I,ll get it out and measure it. sTeVeR

graham kay

95 posts

206 months

Thursday 11th February 2010
quotequote all
The steering wheel i have is just under 14 1/2 inches outer diameter, it is off an S1.

Gerald-TVR

4,896 posts

226 months

Thursday 11th February 2010
quotequote all
This is almost identical to the original moto lita wheel fitted tio the S

assynt road

Original Poster:

379 posts

216 months

Thursday 11th February 2010
quotequote all
graham kay said:
The steering wheel i have is just under 14 1/2 inches outer diameter, it is off an S1.
Graham YHM.

assynt road

Original Poster:

379 posts

216 months

Thursday 11th February 2010
quotequote all
Gerald-TVR said:
This is almost identical to the original moto lita wheel fitted tio the S
Thanks Normansmile

Roy C

4,213 posts

313 months

Friday 12th February 2010
quotequote all
The original MotoLita steering wheel fitted to S1 & S2 was called a "Mk.IV"
(I didn't like the four-spoke, so I changed mine for the equivalent 3-spoke, but with drilled chromed spokes).

Sweet Thunder

220 posts

250 months

Friday 12th February 2010
quotequote all
assynt road said:
Thanks for the replies guys, and the offer Graham. I think I'll investigate how big a wheel will fit, without removing my legs that is!

Edited by assynt road on Wednesday 10th February 22:56
I've had a 15" wheel, this is about the biggest you can fit without your knuckles touching the A-pillar. The bigger wheel actually gives a better feel than the 13" wheel I have now, I just didn't like the flexing of the thin spokes in the 15" wheel. This means I'm still looking for a classic looking 15" wheel with thicker spokes.