Side indicator bulb

[Russ35]

Quick question,

how do you change the side indicator bulb, does the cover just pop of, or do you do it from the foot well?

[phillpot]

I think you have to pop the lamp assembly out of the wing, it is held in by a clip ( broken off in picture) on both vertical sides, I found it a bit of a pig,hence broken clip, because lamp was designed to click into a thin metal wing not a thick fibreglass one and on original fitment perhaps you can get behind wing to squeeze clips in! suggest stick lots of masking tape around lamp to protect paintwork.

[tinks v8S]

russ put your hand in the footwell and feel for item and then play about push sqeeze it will come out

[phillpot]

So you can get at the back of it !

[johnnywgk]

Deffinatly go from inside.

Grab the unit, not the wires, turn anti clockwise, then pull out, it's a bayonet fixing, been doing this recently coz 1 don't work.
just been out to my car and tried it again, this is the way.

Don't try from outside.

HTH

[Russ35]

Thanks for the replies.

I'll give it a go tomorrow.