handbrake

[TonupS2]

Would any body have a picture or if you are in the process of a body lift be able to let me know what type of bolt fits between the handbrake and the chassis between the two holes in the photo? Is it a shoulder bolt?

[Barkychoc]

Its a standard bolt but theres a round metal spacer which is a smaller diameter where it needs to clear the lever.
I'll see if I can find a pic.

Chris

[Barkychoc]

Just been out and taken a pic.

The washer to the left wasn't there originally - after I bent the lever slightly putting the body back on with the lever still on the chassis, the washer was required
The bit with light rust is all one piece of metal - its got 2 different diameters.
If you don't have the piece I reckon you could build it up with a load of washers.

[TonupS2]

As usual Chris you have been a great help thanks. I will get one made up.