Fuel Sender

[mikea4tdi]

I needed a new fuel sender for my s1 so took the one going from Lucy.
Unfortunately its the wrong type.
Mine should have teh 5 fixing holes.
The sender from lucy does fit in the hole and has a metal plate, should I drill it so I have mounting holes rather than a lock ring?
I assuem I need a seal with five wholes in also, any thought?

Mike

[ketvrin]

Mike I think the five hole one is still available (from the US ?) LeTVR did something on this recently IIRC...

K

[ketvrin]

look here too...

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

K

[mikea4tdi]

Did see the old link but it doesnt say what to do if you have one of the other two different types.
Unless I missed somthing

M

[ketvrin]

This is the one I was thinking of...

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

K

[Le TVR]

Mine had gone open circuit. When I got it off the tank I managed to cut away the casing around the rheostat part and found that the resistance wire had broken off at one end. Just a matter of soldering it back on.