Electrical problems S2

[steve j]

Okay folks, I`m now pig sick of those rear light connectors. They`ve gotta go , has anyone replaced theirs and what with?---- My lights are playing up and it is definately the connection, cheers for any help.

Stevej.

[spivvy]

i replaced my rear light clusters, as i was having intermittent faults it was the part the bulbs went into and not the connector itself got from a ford dealers about a fiver each

[spivvy]

i replaced my rear light clusters, as i was having intermittent faults it was the part the bulbs went into and not the connector itself got from a ford dealers about a fiver each

[spivvy]

i replaced my rear light clusters, as i was having intermittent faults it was the part the bulbs went into and not the connector itself got from a ford dealers about a fiver each

[steve j]

spivvy said:

i replaced my rear light clusters, as i was having intermittent faults it was the part the bulbs went into and not the connector itself got from a ford dealers about a fiver each

At a fiver each it`s worth a go

[Jed-S]

I found the wiring that TVR used is too stiff and puts unwanted side pressure on the connector causing the contacts to bend over time. Fit some new connectors with more supple wiring and join that into the exiting loom. Might as well replace the light boards while you are at it as well.

[drivingfroggy]

I did the same. I wired in 4" extensions and bought new lamp holders from ebay

[steve j]

Right, here goes, the bulb cluster, plug and a bulb all shot. I`ve cut off the plug and replaced it with mini spade connectors, new cluster and bulb and all is well