A Shower Cap for Gerald!!!!! (or any S series)
A Shower Cap for Gerald!!!!! (or any S series)
Author
Discussion

Gerald-TVR

Original Poster:

4,896 posts

226 months

Wednesday 3rd September 2008
quotequote all
I find the roof panels a pain in the acensorede when I' just popping ou to the shops/pub etc and the weather dosent look settled to be dry and I have heard other comments on here as well.

I have been to the local trim shop and asked them how much it would be to have a mini cover made just to replace the roof panels when parked. It would cover the top edge of the windscreen, door glass and rear hood. It would be held down at the front with elastics probably around the door mirrors and either fastened to the velcro at the front edge of the base of the hood or hooked into rear wheel arch or wheel (padded hook not to do any damage).

The cost would be about £70 for a one off and obviously cheaper for a quantity, is there any interest

Roy C

4,213 posts

313 months

Wednesday 3rd September 2008
quotequote all
I use one of these:

Car Convertible Top Cover

It is very lightweight, waterproof and easy to fit. I removed the centre straps (for under the car) and reinforced the other straps where they join the cover. Soft plastic hooks fit on to the wheels and the straps can be pulled tight.


Edited by Roy C on Thursday 4th September 07:55

Gerald-TVR

Original Poster:

4,896 posts

226 months

Wednesday 3rd September 2008
quotequote all
Had thought of that but I want someting smaller and easier to use

dougc

8,241 posts

294 months

Wednesday 3rd September 2008
quotequote all
Roy C said:
hehe

It took Chris71 and I five minutes to work out how to put that cover on his motor last night at the pub. We looked like a right couple of muppets, particularly when the impending thunderstorm blew away in the other direction and left a fairly clear sky.

Chris71

21,549 posts

271 months

Wednesday 3rd September 2008
quotequote all
Not sure if that's my one or not - looks similar, but mine doesn't have 'soft plastic hooks'. That or we were doing it very wrong.

Seems perfectly addequate for a shower cap and a lot cheaper than some. It did leave a bit of condensation afterwards thoguh - don't know if the pricier ones are breathable?

I think the other guys thought we were a bit aloof, but three TVRs with roof panels and so on to sort out was always going to be a team effort. hehe

ketvrin

3,504 posts

238 months

Wednesday 3rd September 2008
quotequote all
what I would like is a Lotus Elise style roll-up roof that would have four spring frame pieces to slot into the existing roof location slots (and kind of give it some shape) with two plastic runners, one each side to clip onto the glass...

As Richard Hammond keeps saying.... "How hard can it be?"

I can see my old tent being sacrified in the name of progress now...

K, H. Robinson wink

dougc

8,241 posts

294 months

Wednesday 3rd September 2008
quotequote all
^ often thought about this after seeing a similar setup on a mates VX220. A solid bar fits on one side onto which the window seals. A fabric section containing ribs is rolled out and a second bar fits on the other side for the other window seal. This bit probably wouldn't be too tricky, its getting the seal with the screen surround and the 'roll hoop' that perplexes me.

ketvrin

3,504 posts

238 months

Wednesday 3rd September 2008
quotequote all
Maybe the four ribs should overlap the screen and roof loop with the clips still locating into the existing slots ?

K wobble


dougc

8,241 posts

294 months

Wednesday 3rd September 2008
quotequote all
That would be the obvious place to locate them, problem really is getting the fabric to seal against the surround and the hoop.

Edited by dougc on Wednesday 3rd September 13:23

ketvrin

3,504 posts

238 months

Wednesday 3rd September 2008
quotequote all
Yes that would be essential on the move but the overlap might be sufficient for just parking ?

I'll let you know if it gets past the design stage

K wink

Tall_Blk

377 posts

220 months

Wednesday 3rd September 2008
quotequote all
am interested if this works out.

catretriever

2,090 posts

271 months

Thursday 4th September 2008
quotequote all
I think there have been similar discussions on the Griff forum which might be worth checking out.

I know a number of the owners have taken a saw to their single targa sections to create something akin to the superior 'S' design biggrin

clarenceboddiger

1,398 posts

244 months

Friday 5th September 2008
quotequote all
ketvrin said:
Maybe the four ribs should overlap the screen and roof loop with the clips still locating into the existing slots ?

K wobble
I think we should consult the guy who designed those 1/2 suitcase sized fold out picnic table and 4 chairs that way we could store the roof in the ashtray
hehe

Edited by clarenceboddiger on Friday 5th September 11:28

Gerald-TVR

Original Poster:

4,896 posts

226 months

Friday 5th September 2008
quotequote all
How Big is your ashtray?????????

ketvrin

3,504 posts

238 months

Friday 5th September 2008
quotequote all
clarenceboddiger said:
I think we should consult the guy who designed those 1/2 suitcase sized fold out picnic table and 4 chairs that way we could store the roof in the ashtray
hehe
Now THAT I would buy !

K wink