door lock mechanism
door lock mechanism
Author
Discussion

thomsonpop

Original Poster:

35 posts

221 months

Thursday 15th May 2008
quotequote all
Hi All,

Proud new owner of a lovely S3!! Been making the most of the recent weather!

Only problem encountered so far is that the passenger side door doesn't lock. The key won't turn in the lock and I can't depress the button (even if I try holding the handle up with the door open).

Anyone had a similar problem? There is no mention of a fix for this in Steve Heath's book, though I gather accessing the mechanism is a fiddly job.

Any advice would be welcome.

Thomsonpop

Longers

4,505 posts

257 months

Thursday 15th May 2008
quotequote all
1. Welcome to the forum and the world of S ownership wavey
2. We need to see a pic of your carwink
3. Sounds like you need to update the "Notes" section of your profile hehe
4. Oh, and to answer your question....sorry, I can't help with the door but I'm sure someone who can will be along shortly biggrin

Longers

merky300

189 posts

226 months

Thursday 15th May 2008
quotequote all
Sounds as though it has just siezed up maybe through lack of use, give it a squirt of penetrating fluid for a few days and see if it loosens up. If not the handle isn't to difficult to remove once the door panel is of and will probably just need a good clean and grease.

Tony

pies

13,116 posts

285 months

Thursday 15th May 2008
quotequote all
the cable to the interior door handle could be too short thus preventing the mechanism to drop back

Easy test,just remove the door trim and un hook the cable from the door handle

T' Veteran Racer

72 posts

220 months

Thursday 15th May 2008
quotequote all
Thompsompop

I am not sure what the problem is with the lock but if it helps there is an article on TVR S Series website about removing the door trim, it is fairly straight forward and the door lock mechanism is (on mine anyway) fairly accessible. The only fidly bit I found was getting the interior door release cable off/on. Ihe cable is bent through 180 degrees at the end and is just looped through from back to front on the door lock mechanism.

http://www.tvrsseries.com

I hope that explanation made sense and helped.

Pete

Longers

4,505 posts

257 months

Thursday 15th May 2008
quotequote all
Longers said:
3. Sounds like you need to update the "Notes" section of your profile hehe
clap


Oh, and I told you someone would be along shortly with the answer thumbup

thomsonpop

Original Poster:

35 posts

221 months

Monday 19th May 2008
quotequote all
thanks all, I will take the door trim off and have a look at the mechanism one evening this week. Hopefully it's just a bit stuck.
Thomsonpop