Water Pump identification
Water Pump identification
Author
Discussion

Gerald-TVR

Original Poster:

4,896 posts

226 months

Wednesday 7th May 2008
quotequote all
Is this the correct one for S2, advice please



I'm told for these cars
FORD GRANADA MK 3 2.4 OHV V6 87 - Aug-89
FORD GRANADA MK 3 2.9 OHV V6 87 - 95
FORD SCORPIO 2.4i V6 87 - 94
FORD SCORPIO 2.9 V6, Not 24v , 87 - 94
FORD SCORPIO 2.9 24v 94 - 99
FORD SIERRA 2.9 XR4x4 89 - 93

OE Part Number : 5012434

tvrgit

8,489 posts

281 months

Wednesday 7th May 2008
quotequote all
yes.

markbigears

2,485 posts

298 months

Wednesday 7th May 2008
quotequote all
Gerald, I got a genuine Ford Motorcraft part from TVR Car Parts (£80) Part Number 1 126 035 EPW14, there are a number on eBay but are pattern parts, Also you can't buy the gasket separately, so don't balls it up when fitting!
Also best to replace the 12 bolts (I think it was 12) as they are usually corroded, esp the bottom 2. Got mine from a Ford dealer.

Gerald-TVR

Original Poster:

4,896 posts

226 months

Wednesday 7th May 2008
quotequote all
Thanks Guys very helpful (mark still keep gasket paper so I can make my own)

markbigears

2,485 posts

298 months

Wednesday 7th May 2008
quotequote all
Gerald, Not sure if you've replaced one before, but I gave all the bolts a good spray with Gas Plus every night for a week and didn't snap any bolts.

jimed

1,508 posts

235 months

Wednesday 7th May 2008
quotequote all
I've replaced mine twice over the years and on the second occasion had the bottom bolt snap - luckily leaving a bit exposed but we had to remove the pulley from the c'shaft to get at it ... so Mark's idea is useful in case.
Jim