FAQ's
Author
Discussion

ketvrin

Original Poster:

3,504 posts

238 months

Tuesday 11th March 2008
quotequote all
When was the last time you looked at the FAQ's for this forum ? It looks like it has fallen out of use which is a pity... there are already some typical FAQ's (well there would be wouldn't there rolleyes ) but there are other FAQ's which we see time and again which are not on there...

Kinky says that all we have to do to add a FAQ is to ask him to do it. thumbup so, how about having a few added to get the FAQ's topical, you know the ones...

Pressure Cap on Swirl or header tank
Top Ball Joints
Brake Servo/Reservoir/Master Cylinder
Brake Pipes
Headlamp Trims (with beancan mod)
Melting Connector block
Engine Mounts

etc etc...

Kwink

greymrj

3,329 posts

233 months

Tuesday 11th March 2008
quotequote all
Hi Kevin, must admit I didn't even know that section existed until your post prompted me to find it. I suppose there are two separate and related issues; parts and advice. I treat the alternative parts list as a key parts reference, Steve Parker has (when asked) been putting links on the parts list to the forum discussion on sourcing parts (eg the alternative indicator sources found by forum members are now referenced by links from the parts list. What I try to do therefore is refer new parts info to Steve and that links through to advice on using the parts.
Where I do have a problem is general advice where I find it difficult to locate any past discussions there may have been on anything I want to know. That is a general problem with forums though, the main cross ref is to the title the originator uses, and they vary enormously.

Barkychoc

7,848 posts

233 months

Tuesday 11th March 2008
quotequote all
greymrj said:
Hi Kevin, must admit I didn't even know that section existed until your post prompted me to find it.
Me too. Took me a while too but male pride stopped me asking where it was... hehe

ketvrin

Original Poster:

3,504 posts

238 months

Tuesday 11th March 2008
quotequote all
OK for anyone else who thinks this is a test... its in the "This Forum" tab (right of "My Info" ) of the drop-down menus at the top of the forum...

maybe that should be a FAQ?

where's the FAQ's hehehehehehe

trickjohn

293 posts

238 months

Tuesday 11th March 2008
quotequote all
Where is it? - God I've got no pride.

Sean

kenpage

322 posts

235 months

Tuesday 11th March 2008
quotequote all
hi ive got one...why the f)&* did i start this

petclub

5,486 posts

253 months

Tuesday 11th March 2008
quotequote all
Nope, I've never seen it before either banghead

Big Al.

69,336 posts

287 months

Wednesday 12th March 2008
quotequote all
ketvrin said:
Pressure Cap on Swirl or header tank
Top Ball Joints
Brake Servo/Reservoir/Master Cylinder
Brake Pipes
Headlamp Trims (with beancan mod)
Melting Connector block
Engine Mounts

etc etc...

Kwink
Links would be better and quicker. smile

ketvrin

Original Poster:

3,504 posts

238 months

Wednesday 12th March 2008
quotequote all
Big Al. said:
Links would be better and quicker. smile
Hmmm... I had thought of that Al but felt that the list could grow and be more difficult to manage, but I think its still a possibility... I thought of a Wiki named "FAQ's" with the links in there as you suggest with a brief name of the thread, but wondered if I would be told that there is already a FAQ Link which should be used...

Any comment KINKY ?

preferences anyone ?

K wink

Barkychoc

7,848 posts

233 months

Wednesday 12th March 2008
quotequote all
Kevin - I've added a link on your links page. Whaddya think?

ketvrin

Original Poster:

3,504 posts

238 months

Wednesday 12th March 2008
quotequote all
Barkychoc said:
Kevin - I've added a link on your links page. Whaddya think?
Yep that works as a link to the FAQ page, just need to add the FAQ's we want to that page now...

Some on there are dead, others are old - but maybe still relevant, others need adding from recent history.

How about we figure out a couple of topics that have been discussed recently and get them on there to start the ball rolling... suggestions ...

K wink

hvdweerden

1,739 posts

229 months

Wednesday 12th March 2008
quotequote all
Another tip:

In "My preferences" you can set the "skin" for the forum.

I use the "Blue" one, which shows the FAQ and WIKI directly when you open te S-series forum.

Br, han

Gerald-TVR

4,896 posts

226 months

Wednesday 12th March 2008
quotequote all
You learn somthing 'new' every day nerd

Barkychoc

7,848 posts

233 months

Wednesday 12th March 2008
quotequote all
ketvrin said:
Yep that works as a link to the FAQ page, just need to add the FAQ's we want to that page now...
Balljoints to you Sir!

Big Al.

69,336 posts

287 months

Wednesday 12th March 2008
quotequote all
ketvrin said:
Big Al. said:
Links would be better and quicker. smile
Hmmm... I had thought of that Al but felt that the list could grow and be more difficult to manage, but I think its still a possibility... I thought of a Wiki named "FAQ's" with the links in there as you suggest with a brief name of the thread, but wondered if I would be told that there is already a FAQ Link which should be used...

Any comment KINKY ?

preferences anyone ?

K wink
No Wikis just links, then all the mods can pop in and FAQ them. smile

ketvrin

Original Poster:

3,504 posts

238 months

Thursday 13th March 2008
quotequote all
Barkychoc said:
ketvrin said:
Yep that works as a link to the FAQ page, just need to add the FAQ's we want to that page now...
Balljoints to you Sir!
roflroflrofl

greymrj

3,329 posts

233 months

Thursday 13th March 2008
quotequote all
You be careful what you are doing with my balljoints, I wouldn't like them to be too exposed.http://www.pistonheads.com/gassing/imgs/3.gif

greymrj

3,329 posts

233 months

Thursday 13th March 2008
quotequote all
OK, I clearly dont know how to use the icons either!

ketvrin

Original Poster:

3,504 posts

238 months

Thursday 13th March 2008
quotequote all
greymrj said:
OK, I clearly dont know how to use the icons either!
Hi Richard... were you trying to add a "smilie" ?, unlike some other forums, you cant just click on the one you want, you need to search for the smiley you want via the link directly above the panel you are typing in, when you see the one you want then note the "text" for that smiley so if you wanted the "Laugh" laugh you need to type "laugh" between two colons (oo-err missus !)

if you knew this already then apologies from me rolleyes

K

hvdweerden

1,739 posts

229 months

Friday 28th March 2008
quotequote all
Kevin,

I started a new Topic in the FAQ section for Hoses but when submitting the topic, it appeared in the normal S-forum not in the FAQ section. What am I doing wronk ?

Br, Han