calling Barkychoc
calling Barkychoc
Author
Discussion

andrew mans

Original Poster:

42 posts

238 months

Saturday 9th June 2007
quotequote all
sorry still having indicater problems can you take the photo of your fuse box showing me where ur fuse is mine is nothing like the bible

Barkychoc

7,848 posts

233 months

Sunday 10th June 2007
quotequote all
Sorry only just saw your post I'll do this tomorrow.
What is your engine - Mines a V8S, guess fusebox might be different but I'll do the pic anyway.

Chris

Edited by Barkychoc on Sunday 10th June 22:43

petclub

5,486 posts

253 months

Monday 11th June 2007
quotequote all
Slightly off topic I guess, but you got a mention at the East Mids meet at Foxton Chris. Hope you can get to AF on Tuesday, Dave

andrew mans

Original Poster:

42 posts

238 months

Monday 11th June 2007
quotequote all
im only a small v6 did u replace the flasher will i find it on the tunnel side or the inner wing side the carpets stuck down well cheers

Barkychoc

7,848 posts

233 months

Monday 11th June 2007
quotequote all
Hope these help.
Actual fusebox one hour ago, what a pig it is to take a picture of !
Note the top 4 rows seem to be seperate to the bottom row.
I think the resistors (stripey things sticking out with purple & red wires) at the top are exclusive to the V8.
From the manual the S3/S4 and V8S are the same layout. (Your profile doesn't say what you have).



Fusebox layout from my manual (and it is the same as the fusebox, wonders will never cease!)



I haven't replaced the flasher unit, but I just had a flash of inspiration and have been out to the garage again.
With my indicator ticking away I determined that the flasher unit is on the drivers side above and to the left of the steering column.
As I look under my steering column, its pretty much directly above (about 3 inches above) the left hand bolt securing the column, and its bright orange, though I guess thats by no means guaranteed on yours.
It was a complete sh!t to get my finger on it to feel it ticking, let alone thinking about replacing the flaming thing !

I hope this helps, you owe me one at least one beer.

Cheers

Chris

clarenceboddiger

1,398 posts

244 months

Tuesday 12th June 2007
quotequote all
Just sticking my nose in, but if your flasher unit is ticking I would have thought the fuse is OK?
I would consider checking you connections to your indicator switch, especially the light Green/Brown wire wich feeds it.
Just a thought.

Barkychoc

7,848 posts

233 months

Tuesday 12th June 2007
quotequote all
Its Andrew Mans flasher unit thats not working, not mine.
He didn't know where it was located - and neither did I till last night.

Thanks for taking an interest anyway!

Chris

andrew mans

Original Poster:

42 posts

238 months

Thursday 14th June 2007
quotequote all
got it and got stuck in the footwell fitted new one bad news still not working no indicaters or hazards are you going to s club heaven so i can get you a beer

pies

13,116 posts

285 months

Thursday 14th June 2007
quotequote all
Does the horn work ?

Barkychoc

7,848 posts

233 months

Thursday 14th June 2007
quotequote all
Pies what are you thinking ? Duff switch ?

pies

13,116 posts

285 months

Thursday 14th June 2007
quotequote all
yes

but im still working on a crap drawing frown which is making reading difficult frown

Barkychoc

7,848 posts

233 months

Thursday 14th June 2007
quotequote all
andrew mans said:
got it and got stuck in the footwell fitted new one bad news still not working no indicaters or hazards are you going to s club heaven so i can get you a beer
Sadly no - I am off on my jollies the same day.

Barkychoc

7,848 posts

233 months

Friday 15th June 2007
quotequote all
Andrew are you familiar with electrics?
Could you measure a voltage with a multimeter?
If so and you have the patience I reckon a few of us could get you through this.
if you haven't got a multimeter I bought one from maplin a couple of weeks back for 9 quid which is more than adequate. They do mail order www.maplin.co.uk
I'm going goggle eyed here typing this on my phone waiting for a meeting the customer moved without telling me. Customers who needs em.

andrew mans

Original Poster:

42 posts

238 months

Sunday 17th June 2007
quotequote all
fixed it all working all good thanks guys borken wire