HELP ! Diff Needed !
HELP ! Diff Needed !
Author
Discussion

allan-m

Original Poster:

50 posts

238 months

Tuesday 30th January 2007
quotequote all
Hi All,
Well after taking the diff apart on my S2 1990 it is obvious now where the noise was coming from !
Please - has any one got a good diff 3.64 ratio or point me in the right direction ? any suggestions would be gladly received.

Allan

Le TVR

3,097 posts

280 months

Wednesday 31st January 2007
quotequote all
I think 'donorspares' have been mentioned a few times as a good source.

Good luck.

pistolar

1,474 posts

297 months

Wednesday 31st January 2007
quotequote all
i have an s2 diff with brackets in my garage, £25 collection only due to weight. Problem is i live in hadleigh essex

kostas

995 posts

252 months

Wednesday 31st January 2007
quotequote all
Hi Johnny,

i am looking to fit an LSD in my S2 could you please tell me if your diff si a 7 or 7.5 inch?

thanks

pistolar

1,474 posts

297 months

Wednesday 31st January 2007
quotequote all
kostas said:
Hi Johnny,

i am looking to fit an LSD in my S2 could you please tell me if your diff si a 7 or 7.5 inch?

thanks


sorry, dont think its lsd

kostas

995 posts

252 months

Wednesday 31st January 2007
quotequote all
Probably not but your propshaft flange will be the same as on an lsd, there are 2 types a 7 or 7.5 inch flange diameter, if your diff is a 7 inch then i would be looking for a 7 inch lsd, problem is i cant have a look at mine because its on the car.

allan-m

Original Poster:

50 posts

238 months

Thursday 1st February 2007
quotequote all
Hi Pistolar !

Thank you for your kind offer,i know beggars cant be choosers however can you tell me if it is a 3.64 ratio and what are we reffering to as 7 or 7.5 inch,and lastly is it good.
Thank you i eagerly await your reply.

MickS2

198 posts

267 months

Thursday 1st February 2007
quotequote all
kostas said:
Probably not but your propshaft flange will be the same as on an lsd, there are 2 types a 7 or 7.5 inch flange diameter, if your diff is a 7 inch then i would be looking for a 7 inch lsd, problem is i cant have a look at mine because its on the car.


Re 7.5 inch vs 7 inch diffs. I think the Bible is a little confusing on this - it refers to diff flages, but none of them are actually more than about 4 inches diameter. I believe the 7/7.5 dimension refers to the width across the top of the diff casing between the top mounting bolts. My S1.5 definitely has a 7.5 inch diff.
Apparently the other way to tell is that the 7 inch unit has a single long bolt going through the top mount while the 7.5 inch ones have two separate bolts

pistolar

1,474 posts

297 months

Thursday 1st February 2007
quotequote all
allan-m said:
Hi Pistolar !

Thank you for your kind offer,i know beggars cant be choosers however can you tell me if it is a 3.64 ratio and what are we reffering to as 7 or 7.5 inch,and lastly is it good.
Thank you i eagerly await your reply.


the S was low mileage, so should be OK. Dont know ratio, standard S i presume

allan-m

Original Poster:

50 posts

238 months

Saturday 3rd February 2007
quotequote all
Hi Pistolar
Thanks again for your kind offer,i have been offered one locally,will check this out and come back to you if needed.
Allan