body off for a while
Discussion
Hi Steve.
I found the biggest issue when I took mine off was the rear of the tub drooping from the rear of the doors back.
So if you run some supports under where the body bolts to the chassis behind the front wheels and in front of the rear wheels then another one supporting the boot area you should be fine.
Mick.
I found the biggest issue when I took mine off was the rear of the tub drooping from the rear of the doors back.
So if you run some supports under where the body bolts to the chassis behind the front wheels and in front of the rear wheels then another one supporting the boot area you should be fine.
Mick.
look here
i have some rebuld pictures with a suspended car in it
www.tvrs3series.co.uk/html/body_off_pages.html
i have some rebuld pictures with a suspended car in it
www.tvrs3series.co.uk/html/body_off_pages.html
I used a long pole through the space left when the petroltank removed.
For the front I used the hole in the floor at your feed (drainage holes)
I put a piece of wood on top and a metal plate from below. I put a bolt through (sandwiching the glassfibre) on the bolt I attached the belt lifting the front of the body. works perfectly.
See www.olavbergman.nl
For the front I used the hole in the floor at your feed (drainage holes)
I put a piece of wood on top and a metal plate from below. I put a bolt through (sandwiching the glassfibre) on the bolt I attached the belt lifting the front of the body. works perfectly.
See www.olavbergman.nl
Edited by jagman2 on Monday 18th September 14:41
Edited by Olav Bergman on Saturday 30th September 20:21
Gassing Station | S Series | Top of Page | What's New | My Stuff



