stiff steering

stiff steering

Author
Discussion

paul.deitch

Original Poster:

2,155 posts

264 months

Sunday 3rd November 2002
quotequote all
Does anybody have any idea why the steering should get stiffer on acceleration or braking. There is no obvious looseness in any of the steering components.

GreenV8S

30,492 posts

291 months

Sunday 3rd November 2002
quotequote all

Does anybody have any idea why the steering should get stiffer on acceleration or braking. There is no obvious looseness in any of the steering components.


No good ones, I'd be very concerned about that. Possibly a worn ball joint binding under load or something like that, but until you know for sure what it is I'd be very cautious. The steering column UJs are a common problem area (especially the top one) but typically get stiff intermittantly at certain steering positions rather than under acceleration / braking. Time for a very thorough look at the front suspension I suggest.

montegogt

421 posts

270 months

Monday 4th November 2002
quotequote all
Thought all TVR steerings were supposed to be stiff, or is that just heavy. I have owned an S2 and now have a Wedge, and both had heavy steering...

roy c

4,192 posts

291 months

Monday 4th November 2002
quotequote all
As Peter H rightly points out, stiff steering on an S is usually due to the top steering UJ seizing up as it is vunerable to dirt and wear (worth lubricating and loosely covering).

andyf007

863 posts

265 months

Monday 4th November 2002
quotequote all
Paul

As GreenV8S says no good ones. Get these checked out in the following order (based on cost).

1. Ball joints - these do create heavy steering, but usually more pronounced when braking, the tendency is to get skittish on acceleration.
2. Worn rubber suspension mountings - these, if severe, will allow the wheels to splay in or out under high load, but will be virtually undetectable at cruising loads.
3. Shocks and springs - my personal favourite. Soft nose springs will cause the nose to dip under accel or decel, putting extra weight on to the front wheels. Also worn rear shocks will allow the tail to lift, again shifting weight to the nose.
4. Chassis geometry - has it any accident history?

From looking at your other postings, it would be fair to assume that all things mechanical have been overlooked by it's previous owner
So, with that in mind, I would get it thoroughly checked ASAP.

Stay below 50 until it's sorted though.

Take good care of it and say hello to the autobahns for us

Andy

>> Edited by andyf007 on Monday 4th November 14:12

spnracing

1,554 posts

278 months

Monday 4th November 2002
quotequote all
If the steering is changing in stiffness as you drive then my vote would definitely be the TOP steering column UJ, mine went on the S3C and the effect was strange.

If you're car is an S2 then you might still have the nylon unit which is extremely crap indeed.

paul.deitch

Original Poster:

2,155 posts

264 months

Tuesday 5th November 2002
quotequote all
Thanks to all for your advice. Next weekend its another thing that I'll have to take apart.
Thanks again

paul.deitch

Original Poster:

2,155 posts

264 months

Tuesday 5th November 2002
quotequote all
Thanks to all for your advice. Next weekend its another thing that I'll have to take apart.
Thanks again