Merry Christmas
Discussion
Not yet. Need to connect the starter motor and fit the radiator and hoses and connect ignition barrel. And exhaust.
Need to get the tube on the swirl pot neck repaired as half broke off when trying to make it round again, and it’s too short to connect pipe and get clip on without fouling the radiator cap
Need to fit the steering column, have the bearing conversion kit but need to make up an adapter plate making up as holes don’t suit the S1.
Got engine oil, radiator coolant, brake & clutch fluid, new battery and battery cables and earths to fit.
So getting close now, Never seen her running so that could be fun.
Need to get the tube on the swirl pot neck repaired as half broke off when trying to make it round again, and it’s too short to connect pipe and get clip on without fouling the radiator cap
Need to fit the steering column, have the bearing conversion kit but need to make up an adapter plate making up as holes don’t suit the S1.
Got engine oil, radiator coolant, brake & clutch fluid, new battery and battery cables and earths to fit.
So getting close now, Never seen her running so that could be fun.
88S1 said:
Not yet. Need to connect the starter motor and fit the radiator and hoses and connect ignition barrel. And exhaust.
Need to get the tube on the swirl pot neck repaired as half broke off when trying to make it round again, and it’s too short to connect pipe and get clip on without fouling the radiator cap
Need to fit the steering column, have the bearing conversion kit but need to make up an adapter plate making up as holes don’t suit the S1.
Got engine oil, radiator coolant, brake & clutch fluid, new battery and battery cables and earths to fit.
So getting close now, Never seen her running so that could be fun.
Well thats boxing day’s work all mapped out then! Need to get the tube on the swirl pot neck repaired as half broke off when trying to make it round again, and it’s too short to connect pipe and get clip on without fouling the radiator cap
Need to fit the steering column, have the bearing conversion kit but need to make up an adapter plate making up as holes don’t suit the S1.
Got engine oil, radiator coolant, brake & clutch fluid, new battery and battery cables and earths to fit.
So getting close now, Never seen her running so that could be fun.
WotnoV8 said:
88S1 said:
Not yet. Need to connect the starter motor and fit the radiator and hoses and connect ignition barrel. And exhaust.
Need to get the tube on the swirl pot neck repaired as half broke off when trying to make it round again, and it’s too short to connect pipe and get clip on without fouling the radiator cap
Need to fit the steering column, have the bearing conversion kit but need to make up an adapter plate making up as holes don’t suit the S1.
Got engine oil, radiator coolant, brake & clutch fluid, new battery and battery cables and earths to fit.
So getting close now, Never seen her running so that could be fun.
Well thats boxing day’s work all mapped out then! Need to get the tube on the swirl pot neck repaired as half broke off when trying to make it round again, and it’s too short to connect pipe and get clip on without fouling the radiator cap
Need to fit the steering column, have the bearing conversion kit but need to make up an adapter plate making up as holes don’t suit the S1.
Got engine oil, radiator coolant, brake & clutch fluid, new battery and battery cables and earths to fit.
So getting close now, Never seen her running so that could be fun.
Gassing Station | S Series | Top of Page | What's New | My Stuff